Tanaka TCG 27EBS(SL) Manual

Tanaka Grastrimmere TCG 27EBS(SL)

Læs gratis den danske manual til Tanaka TCG 27EBS(SL) (33 sider) i kategorien Grastrimmere. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Tanaka TCG 27EBS(SL), eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/33
Grass Trimmer/Brush Cutter
Model
TCG 24EBS (SL) / TCG 24EBS (S)
TCG 24EBD (SL) / TCG 24EBD (SLN)
TCG 27EBS (SL) / TCG 27EBS (S)
TCG 27EBD (SL) / TCG 27EBD (SLN)
Handling instructions
Note:
Before using this machine, carefully read through these HANDLING INSTRUCTIONS to ensure
effi cient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as
an important reference when using this machine.
TCG24EBS (SL)
2
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully
understand and observe the following
safety precautions and warnings. Careless
or improper use of the unit may cause
serious or fatal injury.
Choke - Run position (Open)
Choke - Start position (Closed)
Read, understand and follow all warnings
and instructions in this manual and on
the unit.
Ignition stop
Always wear eye, head and ear protectors
when using this unit. Fuel and oil mixture
Do not use metal/rigid blades when this
sign is shown on the unit.
4
Guaranteed Sound power level
Keep all children, bystanders and helpers
15 m away from the unit. If anyone
approaches you, stop the engine and
cutting attachment immediately.
Hot Surface – Contact with hot surface
can cause serious burns.
Be careful of thrown objects.
Blade thrust may occur when the
spinning blade contacts a solid object
in the critical area. A dangerous
reaction may occur causing the entire
unit and operator to be thrust violently.
This reaction is called blade thrust. As
a result, the operator may lose control
of the unit which may cause serious or
fatal injury. Blade thrust is more likely
to occur in areas where it is diffi cult to
see the material to be cut.
min-1
Shows maximum shaft speed. Do not use
the cutting attachment whose max rpm is
below the shaft rpm.
Gloves should be worn when necessary,
e.g., when assembling cutting equipment. Indicate handle location. Do not attach
handle above this point.
Use anti-slip and sturdy footwear.
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See “MAINTENANCE”.
Contents
WHAT IS WHAT .................................................................................3
WARNINGS AND SAFETY INSTRUCTIONS ...................................4
SPECIFICATIONS .............................................................................5
ASSEMBLY PROCEDURES ..............................................................6
OPERATING PROCEDURES ............................................................9
MAI NT ENA NCE ............................................................................... 11
TROUB LESH OOTI NG .....................................................................15

Produkt Specifikationer

Mærke: Tanaka
Kategori: Grastrimmere
Model: TCG 27EBS(SL)

Har du brug for hjælp?

Hvis du har brug for hjælp til Tanaka TCG 27EBS(SL) stil et spørgsmål nedenfor, og andre brugere vil svare dig


Grastrimmere Tanaka Manualer

Tanaka

Tanaka TCG 27EBS(SL) Manual

14 Januar 2025
Tanaka

Tanaka TBC-420PF Manual

12 Oktober 2024
Tanaka

Tanaka TBC-600 Manual

13 Juli 2024
Tanaka

Tanaka TCG 22EAS Manual

8 Juli 2024
Tanaka

Tanaka TBC-550DX Manual

6 Juli 2024

Grastrimmere Manualer

Nyeste Grastrimmere Manualer

RYOBI

RYOBI RY30544 Manual

14 Oktober 2024
Meec Tools

Meec Tools 723-076 Manual

11 Oktober 2024
Pattfield

Pattfield PE-ERT 4025 Manual

14 Juli 2024
Remington

Remington RM2580 Manual

14 Juli 2024
Parkside

Parkside PBS 2 B2 Manual

14 Juli 2024
Maruyama

Maruyama BC2621 Manual

14 Juli 2024
RYOBI

RYOBI 105r Manual

13 Juli 2024
Makita

Makita EM2600U Manual

9 Juli 2024
Fuxtec

Fuxtec E312D Manual

8 Juli 2024
McGregor

McGregor MET4530 Manual

8 Juli 2024