Tanaka THT-2530 Manual


Læs gratis den danske manual til Tanaka THT-2530 (41 sider) i kategorien Hækkeklippere. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Tanaka THT-2530, eller vil du spørge andre brugere om produktet?

Side 1/41
E
S
F
R
G
B
G
B
F
R
E
S
Hedge Trimmer
Taille-Haies
Cortasetos
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
BEFORE operating the power tool. Please keep this manual available for other users and owners before
they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation de cet outil motori peut entraîner la mort ou de INCORRECTE OU DANGEREUSE
sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la curité de ce produit. Prière de
lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce mode d’emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil motori. Ce mode d’emploi
doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización de esta herramienta eléctrica puede provocar lesiones INAPROPIADA O PELIGROSA
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
970-83228-200 2009.07
THT- 210B/SA/2000/SA/
SLA/2100/SA/240B/
2510S/2520SA/2530/
2540
HTD- 2520PFA/2522PFA/
2526PFA/2530PFA
HTS-2530PF
THT-210SA
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you
understand their meaning before use.
It is important that you read, fully understand and observe the following safety
precautions and warnings. Careless or improper use of the unit may cause
serious or fatal injury.
Read, understand and follow all warnings and instructions in this manual and on
the unit.
Always wear eye, head and ear protectors when using this unit.
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See “MAINTENANCE”.
Contents
WHAT IS WHAT? ................................................... 3
WARNINGS AND SAFETY INSTRUCTIONS ......... 4
SPECIFICATIONS .................................................. 6
ASSEMBLY PROCEDURES .................................. 8
OPERATING PROCEDURES ................................. 8
MAINTENANCE ................................................... 10
2


Produkt Specifikationer

Mærke: Tanaka
Kategori: Hækkeklippere
Model: THT-2530

Har du brug for hjælp?

Hvis du har brug for hjælp til Tanaka THT-2530 stil et spørgsmål nedenfor, og andre brugere vil svare dig