TDE Instruments Digalox DPM72-MPN Manual

TDE Instruments Måleudstyr Digalox DPM72-MPN

Læs gratis den danske manual til TDE Instruments Digalox DPM72-MPN (8 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om TDE Instruments Digalox DPM72-MPN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Digalox DPM72-MPN+

Instruction manual (Rev-2020-09)

Graphical panel meter for 500V/333mV AC/DC with RGB multi display

Package contents: Panel meter Digalox DPM72-MPN

+, mounting bracket,

5 jumpers, 2 instruction manuals (EN + DE)

1. Safety instructions

•Read instruction manual carefully before operating the device! Keep for later

reference.

•Mounting and installation must be carried out by suitably qualified and competent

persons only.

•WARNING: The measurement inputs of the device can carry life-threatening

voltages!

•When working on the device hazardous voltages must not be connected to

the device! The terminals J1-J12 are not isolated from the measuring

circuit.

•The device must not be used as the only protective device or protective

shutdown.

•The device is not intended to protect persons or facilities against harm. Specific

devices must be used to guarantee safety (protection relays, cut-off switches,

etc.).

•When connecting switches to the terminals J1-J6, only switches must be used

whose isolation voltage is at least twice the maximum occurring measurement

voltage. For example, when measuring 250;V AC switches must be isolated for at

least 500;V.

•Do not open the housing!

•Do not use the device in the presence of explosive or flammable substances!

•All cables carrying hazardous voltages must be secured with external separators.

2. Meaning of symbols

General warning sign

(Attention, observe the documentation!)

Warning of an electrical hazard

----- ----- 1 / 8

3. Intended use

•Measurement of current, voltage, power and frequency in the specified measuring

ranges.

•Indoor use non condensing, non corrosive.

•Panel mounting.

•In operation, supply the device preferably via screw terminals with 12 to 24;V

AC/DC. If the device is supplied via USB in operation, USB supply voltage must

be at least 5;V.

•Failure to comply with these instructions will void all guarantee and warranty.

4. Description

The multi display with RGB backlight is able to display up to four parameters

simultaneously. Thresholds can be associated with individual warning backlight

colours. A variety of measurement modes (volt AC/DC, ampere AC/DC via external

shunt, frequency, power, cos phi) are supported. The unit can be switched between

measurement modes via an external switch. Minimum and maximum values of up to

four parameters are recorded and can be displayed optionally using an external

switch. Measured values of one parameter are recorded over a time span of 36

seconds up to 14 days. The time base as well as the display of the measuring

history can be activated by an external switch. The measured values remain stored

as long as the device is supplied with voltage.

The following parameters can be adjusted using the configuration software “Digalox

Manager”: scale endpoint, scale caption, display style (pointer, tachometer, bar

graph, and more), splash image, backlight colour, thresholds for alarm output,

threshold warning colour (light, blink), hysteresis, and more. Recorded

measurement values can be read and a continuous transmission of up to four

measurement values can be enabled. Using the software, values can be viewed and

exported as CSV file. Depending on the model, measured values can be transmitted

via USB, XBEE radio technology or RS485 Modbus interface. In addition, the

devices feature a counting function with data retention. This enables operating-

hours-counters or time-counters for exceeding and falling below threshold values, as

well as ampere-hour and energy meters.

Visit to download the software “Digalox Manager”.www.digalox.com

----- ----- 2 / 8

Produkt Specifikationer

Mærke:	TDE Instruments
Kategori:	Måleudstyr
Model:	Digalox DPM72-MPN

Har du brug for hjælp?

Hvis du har brug for hjælp til TDE Instruments Digalox DPM72-MPN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr TDE Instruments Manualer

TDE Instruments Digalox DPM72-AVP Manual

21 August 2024

TDE Instruments Digalox DPM72-MP Manual

20 August 2024

TDE Instruments Digalox DPM72-PP Manual

19 August 2024

TDE Instruments Digalox DPM72-MPPA Manual

19 August 2024

TDE Instruments Digalox DPM72-MPN Manual

18 August 2024

TDE Instruments DPM961 Manual

18 August 2024

TDE Instruments Digalox DPM72-AV Manual

17 August 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025