TDE Instruments Digalox DPM72-PP Manual

TDE Instruments Måleudstyr Digalox DPM72-PP

Læs gratis den danske manual til TDE Instruments Digalox DPM72-PP (8 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19 anmeldelser. Har du et spørgsmål om TDE Instruments Digalox DPM72-PP, eller vil du spørge andre brugere om produktet?

Side 1/8
Digalox DPM72-PP
Instructio
Visit www.digalox.com
to dow
Package contents:
Panel me
1. Intended Use
Indoor use non
condens
Panel mounting.
Failure to comply with th
Preferred supply of USB
Supply via USB in opera
2. Safety instructions
Note: the measuremen
voltages!
When working on the
d
the device!
The device must not be
shutdown.
Read instruction manual
The device is not intende
devices must be used to
When
connecting switch
whose isolation voltage
voltage. For example,
wh
least 500V.
Do not open the
housing
Do not use
the instrumen
All cables
carrying hazar
separators.
----- ----- 1
on manual
(Rev-2015-04)
wnload
software “Digalox
Manager
ter Digalox DPM72,
5x jumpers, 1
x
ing
, non corrosive.
ese instructions will
void
all guaran
devices via scre
w terminals with 1
ation, USB supply voltage must be a
t inputs of the device can carry l
device
hazardous voltages must
e used as the only protective dev
carefully before operating the devi
ed to protect persons or facilities ag
gua
rantee safety (prote
ction relais
es
to the terminals J1-J6 only
switc
s at least
twice the
maximum occu
hen measuring
250V AC switch
mu
g!
nt
in the presence of explosive or
fla
rdous
voltages must be secured
wit
.
x
mounting bracket
tee and warranty.
0 to
24V AC/DC.
at least 5V.
ife
-threatening
not be connected
to
vice or protective
ce!
gainst harm. Specific
, off
-switches, etc).
ches must
be used
rring
measurement
ust be isolated
for at
ammable substances!
th external
----- ----- 2
3. Description
The measuring modes analogue signal 0/4 to 20 mA and 60mV DC shunt are
supported. Scale-endpoint of the indicator as well as scaling of the analogue signal
and current transformer measurement can be adjusted freely via the DIP-switch,
alternatively there is an option for automatic adaption of the scale-endpoint. The
unit can be switched between volt and ampere measurement via an external
switch. Minimum and maximum values are recorded and can be displayed
optionally using an external switch. Measured values are recorded over a time
span of 3 minutes up to 14 days. The time base as well as the display of the
measure history can be activated by an external switch.
The following parameters can be adjusted using the USB-Software: Scale-
endpoint, scale-caption, display-style (pointer, tachometer, bar graph, and more),
splash display, thresholds for alarm output, hysteresis, and more. Recorded
measurement values can be read and a continuous transmission of the actual
measuring value can be enabled. Using the software, values can be viewed and
exported as CSV.
Front
1 Unit or free text
2 Threshold value
3 Upper scale caption
4 Graphical measurement display
5 Digital measurement value
6 Lower scale caption
Back
1 2 optocoupler switch outputs
2 DIP switch for setting measurement
mode and upper scale caption
3 Supply voltage input
4 Jumpers for configuration or connection
external switch for activating/switching
measurement mode, graphical historic
data display, min/max display, auto-
scaling
5 USB interface for alternative power
supply and software communication
interface
6 Measurement inputs


Produkt Specifikationer

Mærke: TDE Instruments
Kategori: Måleudstyr
Model: Digalox DPM72-PP

Har du brug for hjælp?

Hvis du har brug for hjælp til TDE Instruments Digalox DPM72-PP stil et spørgsmål nedenfor, og andre brugere vil svare dig