TDK-Lambda DPP120-48-1 Manual


Læs gratis den danske manual til TDK-Lambda DPP120-48-1 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 68 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 34.5 anmeldelser. Har du et spørgsmål om TDK-Lambda DPP120-48-1, eller vil du spørge andre brugere om produktet?

Side 1/16
Page 1 of 16 DPP120-xx-1, 23419 issue 02 April 2013
Product HANDBOOK
DPP120
-
xx
-
1
General Safety Instructions:
ENGLISH
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are
permitted to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support
systems or equipment for use in hazardous environments without the express written approval of the
Managing Director of TDK-Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent
personnel.
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be
used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2,
overvoltage category II environment. Material Group IIIb PCB’s are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label,
except as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at
the end of its service life and in accordance with local regulations.
RISK OF ELECTRIC SHOCK
High Voltage Warning:
Dangerous voltages are present within the power supply. The professional installer must protect service
personnel from inadvertent contact with these dangerous voltages in the end equipment.
This product must be reliably earthed and professionally installed in accordance with the prevailing local
electrical wiring regulations and safety standards.
The (+) or (-) output(s) can be earthed or left floating.
An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit
must be returned to TDK-Lambda UK LTD or one of their authorised agents.
Page 2 of 16 DPP120-xx-1, 23419 issue 02 April 2013
Product HANDBOOK
DPP120-xx-1
HOT SURFACE
External Hot Surfaces:
In accordance with local regulations for Health and Safety at work, manufacturers have an obligation to
protect service engineers as well as users. In order to comply with this, a label must be tted to these
products which is clearly visible to service personnel accessing the overall equipment, and which legibly
warns that surfaces of these products may be hot and must not be touched when the products are in
operation.
The ventilation openings on these products must not be impeded. Ensure that there is at least 25mm spacing
between any obstruction and the ventilation openings.
The unit cover/chassis is designed to protect skilled personnel from hazards. They must not be used as part
of the external covers of any equipment where they may be accessible to operators, since under full load
conditions, part or parts of the unit chassis may reach temperatures in excess of those considered safe for
operator access.


Produkt Specifikationer

Mærke: TDK-Lambda
Kategori: Ikke kategoriseret
Model: DPP120-48-1

Har du brug for hjælp?

Hvis du har brug for hjælp til TDK-Lambda DPP120-48-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret TDK-Lambda Manualer

TDK-Lambda

TDK-Lambda DSP60-12 Manual

4 September 2024
TDK-Lambda

TDK-Lambda Z60-10 Manual

16 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer