TDK-Lambda DSP10-24 Manual

TDK-Lambda Ikke kategoriseret DSP10-24

Læs gratis den danske manual til TDK-Lambda DSP10-24 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om TDK-Lambda DSP10-24, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Page 1 of 16 DSP10 Series, 23415 issue 02, April 2013
Product HANDBOOK
DSP10
-
xx
General Safety Instructions:
ENGLISH
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are
permitted to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support
systems or equipment for use in hazardous environments without the express written approval of the
Managing Director of TDK-Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent
personnel.
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be
used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2,
overvoltage category II environment. Material Group IIIb PCB’s are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label,
except as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at
the end of its service life and in accordance with local regulations.
RISK OF ELECTRIC SHOCK
High Voltage Warning:
Dangerous voltages are present within the power supply. The professional installer must protect service
personnel from inadvertent contact with these dangerous voltages in the end equipment.
This product must be reliably earthed and professionally installed in accordance with the prevailing local
electrical wiring regulations and safety standards.
The (+) or (-) output(s) can be earthed or left floating.
An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit
must be returned to TDK-Lambda UK LTD or one of their authorised agents.
Page 2 of 16 DSP10 Series, 23415 issue 02, April 2013
Product HANDBOOK
DSP10
-
xx
HOT SURFACE
External Hot Surfaces:
In accordance with local regulations for Health and Safety at work, manufacturers have an obligation to
protect service engineers as well as users. In order to comply with this, a label must be fitted to these
products which is clearly visible to service personnel accessing the overall equipment, and which legibly
warns that surfaces of these products may be hot and must not be touched when the products are in
operation.
The ventilation openings on these products must not be impeded. Ensure that there is at least 25mm spacing
between any obstruction and the ventilation openings.
The unit cover/chassis is designed to protect skilled personnel from hazards. They must not be used as part
of the external covers of any equipment where they may be accessible to operators, since under full load
conditions, part or parts of the unit chassis may reach temperatures in excess of those considered safe for
operator access.

Produkt Specifikationer

Mærke: TDK-Lambda
Kategori: Ikke kategoriseret
Model: DSP10-24

Har du brug for hjælp?

Hvis du har brug for hjælp til TDK-Lambda DSP10-24 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret TDK-Lambda Manualer

TDK-Lambda

TDK-Lambda DSP10-15 Manual

4 Juli 2025
TDK-Lambda

TDK-Lambda DSP10-24 Manual

4 Juli 2025
TDK-Lambda

TDK-Lambda DPP100-24 Manual

3 Juli 2025
TDK-Lambda

TDK-Lambda Z36-12 Manual

3 Juli 2025
TDK-Lambda

TDK-Lambda DSP100-15 Manual

3 Juli 2025
TDK-Lambda

TDK-Lambda DPP120-48-1 Manual

4 September 2024
TDK-Lambda

TDK-Lambda DSP60-12 Manual

4 September 2024
TDK-Lambda

TDK-Lambda Z60-10 Manual

16 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta

Rowenta Essential VU4110 Manual

4 Juli 2025
Rowenta

Rowenta Compacteo Cyclonic RO3427 Manual

4 Juli 2025
Rowenta

Rowenta Advancer DZ9110 Manual

4 Juli 2025
IFM

IFM AC1303 Manual

4 Juli 2025
Graco

Graco Olivia 3-In-1 Manual

4 Juli 2025
Sony

Sony BKM-XP1 Manual

4 Juli 2025
Rowenta

Rowenta Compact Liss 230 SF1042 Manual

4 Juli 2025
BaoFeng

BaoFeng UV-82X3 Manual

4 Juli 2025
MKC power

MKC power Arcadia 600S Manual

4 Juli 2025
Schneider

Schneider LUCB32ES Manual

4 Juli 2025