Technoline WT 189 Manual

Technoline Clockradio WT 189

Læs gratis den danske manual til Technoline WT 189 (3 sider) i kategorien Clockradio. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Technoline WT 189, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

INSTRUCTION MANUAL WT189

FEATURES:

- Radio controlled clock

- Manual time setting

- -or 24-hour time display 12

- Calendar display

- Time zone (+/- 12 hours)

- Indoor temperature in °C/°F

- Alarm snooze function

- 5 languages selectable display in Day-of week: German, English, Spanish, Italian and French –

- Jumbo LCD

- B -light ack

SETTING UP:

1. Firstly, open the battery cover at the back of the clock.

2. 2 Checking the correct polarization, insert x AAA, LR3, 1.5V batteries into the compartment and

replace the cover.

3. When the batteries are inserted, the clock will be automatically scanning for the radio controlled

time signal.

4. If after 6 minutes the DCF time has not been received, you can manually set the time. (see chapter

manual time setting)

5. If the clock cannot receive the signal at the ﬁrst time, it will automatically attempt to receive the

signal again one hour later.

6. The clock will automatically receive the signal everyday 2.00 am.

7. When the clock is scanning for signal, only the WAVE key is operational.

MANUAL TIMETING:

In some cases after inserting the batteries, the clock may not be able to receive the DCF signal. In this

situation, the time should be set manually.

1. Press and hold the TIME key for 3 seconds and the hour digits will start ﬂashing, press or “ ” ▲ ▼

key to adjust the hour.

2. Press the TIME key again and the minute digits will start ﬂashing, press the or key to “ ” ▲ ▼

adjust the minute.

3. Press the TIME key again and the second digits will start ﬂashing, press the or key to clear “ ” ▲ ▼

the second to 0. “ ”

4. Press the TIME key again and the year digits will start ﬂashing, press or key to adjust the “ ” ▲ ▼

year.

5. Press the TIME key again and the dash between date and month will start ﬂashing, press “ ” “ ” “ ”

▲ ▼ “ ” “ ”or key to shift the position of date and month .

6. Press the TIME key again and the month digits will start ﬂashing, press the or key to “ ” ▲ ▼

adjust the month.

7. Press the TIME key again and the date digits will start ﬂashing, press the or key to adjust “ ” ▲ ▼

the date.

8. Press the TIME key again and then press the or key to set the time zone, e.g. when the ▲ ▼

country time is faster than DCF time for 1 hour, the zone should be set to +1.

9. Press the TIME key again and then press the or key to choose the language for the Day of ▲ ▼

week.

10. Press the TIME y again to return to normal display. ke

ALARMTING:

1. Press the ALARM key.

2. Press and hold the ALARM key for 3 seconds and the minute digits of alarm time will start “ ”

ﬂashing, press or key to adjust the minute. ▲ ▼

3. Press the ALARM key again and the hour digits of alarm time will start ﬂashing, press or “ ” ▲ ▼

key to adjust the hour.

4. Press the ALARM key again to return to alarm time display.

5. Press the ALARM ON/OFF key once to activate alarm on function and twice to activate snooze

function. Press the ALARM ON/OFF key once more, the alarm on function will be inactivated.

6. Press TIME key to return to normal display mode.

FUNCTION KEYS

SNOOZE/LIGHT KEY

-When the snooze alarm beeps, press the SNOOZE/LIGHT key to pause the alarm for 5 minutes and

the snooze function can be used repeatedly.

To stop snooze function, just press other keys once.

-Press the SNOOZE/LIGHT key to illuminate the LCD for 3 seconds.

C/F KEY

-In normal time display, press the C/F key to toggle between Celsius and Fahrenheit temperature

readings.

12/24 KEY

-In normal time display, press the 12/24 key to toggle between 12h and 24h display.

WAVE KEY

-In normal time display, press and hold the WAVE key for 3 seconds to activate the DCF scanning

function.

-If the clock is scanning for the DCF signal, press the WAVE key once to inactivate the DCF scanning

function.

Produkt Specifikationer

Mærke:	Technoline
Kategori:	Clockradio
Model:	WT 189
Type:	Digital bordur
Bredde:	120 mm
Dybde:	30 mm
Højde:	90 mm
Antal pr. pakke:	1 stk
Produktfarve:	Sølv
Skærmtype:	LCD
Formfaktor:	Rektangulær
Husmateriale:	Plast
Kalender:	Ja
Termometer:	Ja
Batterier inkluderet:	Ja
Batteritype:	Micro AAA, LR03
Vækkeur:	Ja
Antal understøttede batterier:	2
Baggrundslys:	Ja