GB 2
3. Getng Started:
Open battery Cover (C1)
Insert 2 x AAA size baeries observing polarity [“ +” and “ –“ marks]
Replace baery compartment cover
Place the unit onto at surface; the unit is ready for use now.
4. Time and Alarm Setng
4.1 Radio Controlled Time:
Aer the start-up of the unit, the clock automacally starts scan the DCF me signal. Radio Control to
Icon “ ” (A4) ashes on LCD.
The clock is automacally synchronized with the DCF radio signal every day at 2.00 am & 3.00 am to
maintain accurate me keeping. If synchronizaon with the DCF radio signal fails, “ ” on LCD
disappears and the clock then aempts to synchronize with the DCF radio signal at 4.00 am and 5am.
The clock can be set to scan the radio signal manually by holding “ ” buon (B5) for 3 seconds. Each
recepon takes around several minutes. If recepons fail, scanning stops. (“ ” on LCD disappear) and
repeats again on next full hour. E.g. scanning failed at 8:20a.m. It will scan again at 9:00a.m.
Stop scanning DCF radio signal by holding 5) for 3 seconds. “ ” buon (B
“ ”DST is shown on the LCD if it is in Daylight Saving Time Mode
4.2 Manual Time Setng:
In me display, Press “ ” buon (BTIME SET 3) to select to view :
Time & Date Time & Year
In me display, TIME SEThold “ ” buon (B3) for 3 seconds to enter Clock/Calendar seng Mode.
Press “▲” (B ) or “4▼” (B ) buon to adjust the seing and press “ ” buon (B5 TIME SET 3) to conrm each
seng.
(By keeping the “▲” (B ) or “4▼” (B5) buon pressed, could accelerate the process and reach the desired
value more quickly)
The seng sequence is shown as follow: RCC ON/OFF, 12/24 Time format for alarm me, Time Zone,
Hour, Minutes, Year, Month, Date, Language of Weekday, C/F (unit of temperature seng)