Tennsco 1872 Manual

Tennsco Vægskab 1872

Læs gratis den danske manual til Tennsco 1872 (4 sider) i kategorien Vægskab. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Tennsco 1872, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PK-1830918

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

Deluxe Combination Cabinet

Unassembled Models 1872 & 2472

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance on products.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply

in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

LOAD CAPACITIES PER SHELF LEVEL

36w x 18d

36w x 24d

18w x 18d

18w x 24d

200 lbs.

75 lbs.

UNIT SIZE

WEIGHT CAPACITY

EVENLY DISTRIBUTED

ASSEMBLY OF 1872 OR 2472 CABINET

Tools Needed: A free

/ ” nut driver is included with each Tennsco cabinet. 32

Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.

2. Place the cabinet back (Ref. No. 1) on a protected surface

to prevent scratching the paint. The ange on the bottom of

the back should be

facing upward.

1. The reference numbers used throughout this sheet refer to

the illustration on the back cover. This is to help you to

identify the various parts as they are mentioned.

Attach the left side (Ref. No. 2) to the back by placing ange

(A) around the back and bolting together with seven bolts

and nuts (Ref. Nos. 19 & 20). Be sure that the lances on all

shelf adjustment strips (B) point in the same direction.

5. Place the top (Ref. No. 5) onto

the unit. Be sure that the

anges tuck inside the cabinet

sides and back. Secure with

eleven nuts and bolts. The

front part of the top

will bolt into place

in step 8.

3. Attach the right side (Ref. No. 3) to the back in the same

manner as in step 3, again making sure that the ange

is around the back and that the lances on the shelf adjust

ment strips are pointed in the same direction as those on the

back and left side.

6. With both doors in the closed position, lift the door and

frame assembly (Ref. No. 6) and place it over the cabinet

body. Be aware that the door latches have not yet been

7. With the door and frame assembly in place, attach it

securely to the unit by opening each

door, one at a time, and securing

the frame assembly using

two bolts and twenty

nuts. This will require

attaching nuts to the

nine pre-welded studs

along each side, plus

two bolts and nuts

along the top.

attached so the

doors could

potentially swing

open if the door

frame is held in

an upsidedown

position. The door

frame should

cover the outside

edges of the

entire storage

cabinet front.

4. Place the shelf (Ref. No. 4) into one

of the upper positions on the unit

by inserting the shelf edges into

the lances on all four shelf

adjustment strips. Be

sure that the

channeled

edge of the

shelf is

toward the

cabinet front.

Two holes

must be in front.

8. Place the the bottom (Ref. No. 7) in the lowest notch of the

shelf adjusting strips on the back. Make sure the ange with

two holes faces the front, and that it is over the ange of the

frame sill. If necessary, you may

push out on the side

walls to

enable

the bottom

to more

easily slide

into position. Attach

the shelf securely by bolting

the bottom to the frame sill

with two bolts and nuts.

Insert shelf

into bottom lances.

NOTE: When bolting the unit together, leave

the bolts slightly loose until Step 10, unless

otherwise speciﬁed.

All lances point UP on

the back and side.

Flanges

face upward

Flange goes

under back.

Produkt Specifikationer

Mærke:	Tennsco
Kategori:	Vægskab
Model:	1872

Har du brug for hjælp?

Hvis du har brug for hjælp til Tennsco 1872 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vægskab Tennsco Manualer

Tennsco 7124 Manual

15 Juni 2025

Tennsco 7820 Manual

15 Juni 2025

Tennsco 7824 Manual

15 Juni 2025

Tennsco CVD7218 Manual

14 Juni 2025

Tennsco 4218 Manual

14 Juni 2025

Tennsco CVD1870 Manual

14 Juni 2025

Tennsco J2478A-N Manual

14 Juni 2025

Tennsco 1872 Manual

14 Juni 2025

Tennsco 2471 Manual

14 Juni 2025

Tennsco 3018 Manual

14 Juni 2025

Vægskab Manualer

Nyeste Vægskab Manualer

15 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

13 Juni 2025

Gladiator GAFS42KDJG Manual

13 Juni 2025

Gladiator GAGB54SBJG Manual

13 Juni 2025

Gladiator GAJG36GRDG Manual

12 Juni 2025

Gladiator GAGD277DJG Manual

11 Juni 2025

Gladiator GALG362DPG Manual

11 Juni 2025