Tennsco CVD7218 Manual

Tennsco Vægskab CVD7218

Læs gratis den danske manual til Tennsco CVD7218 (4 sider) i kategorien Vægskab. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Tennsco CVD7218, eller vil du spørge andre brugere om produktet?

Side 1/4
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling
For safety, wear a pair of work gloves when assembling or performing a
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the
in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by person
shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.
PK-2570918
ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
Deluxe Storage Cabinet
Unassembled Models 1842 & 2442
Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686
LOAD CAPACITIES PER SHELF LEVEL
36w x 18d
36w x 24d
200 lbs.
200 lbs.
UNIT SIZE
WEIGHT CAPACITY
EVENLY DISTRIBUTED
ASSEMBLY OF 1842 OR 2442 CABINET
Tools Needed: A free
11
/ nut driver is included with each Tennsco cabinet. 32
Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.
2. Place the cabinet back (Ref. No. 1) on a protected surface
to prevent scratching the paint. The ange on the bottom of
the back should be facing upward.
1. The reference numbers used throughout this sheet refer to
the illustration on the back cover. This is to help you to
identify the various parts as they are mentioned.
3. Attach the left side (Ref. No. 2) to the back by placing
ange (A) around the back and bolting the back and side
together with four bolts and nuts (Ref. Nos. 15 & 16). Be
sure that the lances on all shelf adjustment strips (B) point in
the same direction.
5. Insert one shelf (Ref. No. 4) into the approximate center
of the unit, inserting the shelf edges into the lances on all
four shelf adjustment strips. Be sure that the channeled
edge of the shelf is toward the cabinet front.
6. Place the second shelf at the desired level in the
same manner as in step 5. Next, attach the door frame
assembly (Ref. No. 6) to the cabinet body by placing
it over the sides. Align the weld studs with the slots in the
left and right sides, and attach using four nuts on each side.
4. Attach the right side (Ref. No. 3) to the back in the same
manner as in step 3, again making sure that the ange
is around the back and that
the lances on the shelf
adjustment strips
are pointed in
the same
direction as
those on the
back and
left side.
All lances point UP on
the back and side.
B
Flange faces upward.
Flange goes
under back.
A
Channeled edge of the shelf is
toward the front of the unit.


Produkt Specifikationer

Mærke: Tennsco
Kategori: Vægskab
Model: CVD7218

Har du brug for hjælp?

Hvis du har brug for hjælp til Tennsco CVD7218 stil et spørgsmål nedenfor, og andre brugere vil svare dig