Tennsco 2436 Manual

Tennsco Skab 2436

Læs gratis den danske manual til Tennsco 2436 (4 sider) i kategorien Skab. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Tennsco 2436, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

GENERAL SAFETY INFORMA

GENERAL SAFETY INFORMATION

TION

TIONGENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling

For safety, wear a pair of work gloves when assembling or performing a

LIMITED WARRANTY

LIMITED WARRANTYLIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the

in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by person

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

PK-1451119

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RET

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

AIN INSTRUCTIONS FOR FUTURE REFERENCE

AIN INSTRUCTIONS FOR FUTURE REFERENCE RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

36” High Standard Storage Cabinet

Unassembled Models 1436 & 2436

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

LOAD CAP

LOAD CAPACITIES PER SHELF LEVEL

ACITIES PER SHELF LEVEL

ACITIES PER SHELF LEVELLOAD CAPACITIES PER SHELF LEVEL

36w x 18d

200 lbs.

UNIT SIZE

UNIT SIZEUNIT SIZE

WEIGHT CAP

WEIGHT CAPACITY

ACITY

ACITYWEIGHT CAPACITY

EVENL

Y DISTRIBUTED

Y DISTRIBUTEDEVENLY DISTRIBUTED

36w x 24d

200 lbs.

ASSEMBLY OF 1436 OR 2436 CABINET

Tools Needed: A free

/ ” nut driver is included with each Tennsco cabinet. 32

Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.

2. Place the cabinet back (Ref. No. 1) on a protected surface

to prevent scratching the paint. The ange on the bottom of

the back should be facing upward.

1. The reference numbers used throughout this sheet refer to

the illustration on the back cover. This is to help you to

identify the various parts as they are mentioned.

3. Attach the left side (Ref. No. 2) to the back by placing

ange (A) around the back and bolting the back and side

together with four bolts and nuts (Ref. Nos. 17 & 18). Be

sure that the lances on all shelf adjustment strips (B) point in

the same direction.

5. Attach the right side (Ref. No. 3) to the back in the same

manner as you did in step 3, again making sure that the

ange is around the back and that the lances on the

shelf adjustment strips are pointed in the same direction

as those on the back and left side. Push the side panel up

so the studs in the top

go through the

holes in the

top ange of

side and

fasten with

three nuts.

6. Attach the sill (Ref. No. 6) to the sides. Place nuts

loosely on each of the studs and slide the ends of the

sill into the slots on both sides of the unit. Then,

securely tighten the nuts.

Attach the top (Ref. No. 5) to the unit by sliding the outer

ange over the back of the unit and the side ange to the

side panel on the unit. The threaded studs should go

through the holes in the

top ange of the

side and fasten

with three nuts.

Attach the back

to the top using

four bolts

and nuts.

All lances point UP on

the back and side.

Flange faces upward.

Flange goes

under back.

7. Place the rear ange of the bottom (Ref. No. 9) into the

bottom lances of the back. The ange with two holes should

face the front, hanging over the sill. Insert bolts through the

bottom and sill with the head facing the front of the unit.

Secure with

two nuts.

Insert shelf into the

bottom lances.

Produkt Specifikationer

Mærke:	Tennsco
Kategori:	Skab
Model:	2436

Har du brug for hjælp?

Hvis du har brug for hjælp til Tennsco 2436 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skab Tennsco Manualer

Tennsco J1878C-N Manual

16 August 2024

Tennsco 1436 Manual

15 August 2024

Tennsco CVD7214 Manual

14 August 2024

Tennsco 7220 Manual

14 August 2024

Tennsco JSD2478SU Manual

12 August 2024

Tennsco CVD1472 Manual

12 August 2024

Tennsco J2478A-N-W Manual

11 August 2024

Tennsco 7814 Manual

10 August 2024

Tennsco 2472 Manual

9 August 2024

Tennsco 1471 Manual

9 August 2024

Skab Manualer

Nyeste Skab Manualer

Ikea MAXIMERA 904.170.42 Manual

20 Februar 2025

Ikea UTRUSTA 502.132.97 Manual

20 Februar 2025

Ikea UTRUSTA 902.135.73 Manual

20 Februar 2025

Ikea UTRUSTA 602.711.59 Manual

20 Februar 2025

Ikea UTRUSTA 903.669.24 Manual

20 Februar 2025

Ikea UTRUSTA 403.059.71 Manual

20 Februar 2025

Ikea NYTTIG 302.432.95 Manual

20 Februar 2025

Ikea MAXIMERA 603.193.59 Manual

20 Februar 2025

Ikea MAXIMERA 603.193.64 Manual

20 Februar 2025

Ikea MAXIMERA 903.193.48 Manual

20 Februar 2025