Tennsco 2470 Manual

Tennsco Vægskab 2470

Læs gratis den danske manual til Tennsco 2470 (4 sider) i kategorien Vægskab. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Tennsco 2470, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
PK-1810912
Congratulations on your purchase of a Tennsco Deluxe
Storage Cabinet! Tennsco's 1870 and 2470 units are
general purpose storage cabinets that provide a level of
quality you won't find elsewhere. They provide secure
storage for office supplies, books, records, small parts,
tools, etc.
These cabinets offer five openings with four adjustable
one lockable with two keys), and a three-point locking
system for extra security. Additional features include
rear louvres for ventilation and nylon lock-bar guides to
ensure quiet operation.
Tennsco's cabinets are constructed from top quality 22
to 24 gauge steel with a 16 gauge frame, and offers
weight capacities of up to 200 lbs. per shelf (evenly
distributed). Our attractive and durable powder-coated
paint finish will provide for years of service.
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken
when handling various pieces to avoid injury. For safety,
wear a pair of work gloves when assembling or performing
any maintenance on your cabinet.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1810912
Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000
TENNSCO DELUXE STORAGE CABINET
Models 1870 and 2470
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons
not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS
CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT
SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by
Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
(615) 446-8000 or (866) 446-8686 (toll free)
Website: www.tennsco.com E-mail: Info@tennsco.com
Tools needed: An
11
/32" nut driver (provided free with unit); a hammer; and a flathead screwdriver.
Two people recommended for installation. Approximate assembly time: 15 to 25 minutes.
INSTALLATION OF 1870 AND 2470 CABINETS
1. The reference numbers used throughout this
sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as
they are mentioned.
2. Place the cabinet back (Ref. No. 1) on a
protected surface to prevent
scratching the paint.
The flanges should
be facing
upward.
4. Attach the right side (Ref. No. 3) to the back in
the same manner
as you did in step 3,
again making sure that
the flange is around
the back and
that the lances on the shelf adjustment strips
are pointed in the same
direction as those on the
back and left side.
Flanges face upward
3. Attach the left side (Ref. No. 2) to the back by
placing flange (A) around the back and
bolting the back
and side
together
with seven bolts
and nuts (Ref. Nos. 16 &17). Be sure that the
lances on all shelf adjustment strips (B) point in
the same direction.
Flange goes
under back
B
A
All lances point
UP on both
back and side.
6. Place the top (Ref. No. 5) onto
the unit. Be sure that the flanges
tuck inside the cabinet sides and
back. Secure with 11 bolts and
nuts (three along each side,
and five in the back).
The front of the
top will bolt
into place
in step
8.
7. With both doors in the closed position, lift the door
and frame assembly (Ref. No. 6)
and place it over the cabinet
body. Be aware that the
door latches have
not yet been
attached, so
the doors
could potentially swing
open if the door frame is
held in an upside-
down position.
The door
frame should
cover
the
outside edges
of the entire
storage cabinet front.
Inset A
5. To help hold the sides in position, insert one
shelf (Ref. No. 4) into the approximate center of
the unit, inserting the shelf edges into the
lances on all four shelf adjustment strips.
Be sure that the
channeled edge of
the shelf is toward
the cabinet
front. If
a lance
is too
tight, it
may be
helpful to use
a screwdriver to
slightly pry it open.

Produkt Specifikationer

Mærke: Tennsco
Kategori: Vægskab
Model: 2470

Har du brug for hjælp?

Hvis du har brug for hjælp til Tennsco 2470 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vægskab Tennsco Manualer

Tennsco

Tennsco 1470 Manual

13 Juni 2025
Tennsco

Tennsco 2470 Manual

12 Juni 2025
Tennsco

Tennsco J1878A-N-W Manual

11 Juni 2025
Tennsco

Tennsco 1470RH Manual

11 Juni 2025

Vægskab Manualer

Nyeste Vægskab Manualer

Gladiator

Gladiator GAFS42KDJG Manual

13 Juni 2025
Gladiator

Gladiator GAGB54SBJG Manual

13 Juni 2025
Gladiator

Gladiator GAJG36GRDG Manual

12 Juni 2025
Gladiator

Gladiator GAGD277DJG Manual

11 Juni 2025
Gladiator

Gladiator GALG362DPG Manual

11 Juni 2025
Gladiator

Gladiator GARK365TGG Manual

11 Juni 2025
Gladiator

Gladiator GAGB28FDYG Manual

10 Juni 2025
Kohler

Kohler K-2967 Manual

7 Juni 2025
Draper

Draper Expert 21663 Manual

6 Juni 2025
Draper

Draper 19572 Manual

6 Juni 2025