TFA Meteotime Info Manual

TFA Vejrstation Meteotime Info

Læs gratis den danske manual til TFA Meteotime Info (3 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 28 anmeldelser. Har du et spørgsmål om TFA Meteotime Info, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

KSPO: 0986-13(TFA)

TFA DV229NL & TS21 MANUAL 1(ENG)

SIZE: W105 X H148 (mm)

BY Lai HZ 2/01/14

Remote Thermo-Hygrometer

Main Unit

Personal Meteo Centre

with

Wireless Thermo-Hygrometer

In/Outdoor Temperature/

Humidity.

Information Window.

Today Weather Information

including Wind Speed, Wind

Direction, and the probability

of Rain/Snow, Day &

Night Temperature, Day &

Night Weather Status.

Tomorrow, One-Day-After,

and Two-Day-After Weather

Information including Day &

Night Temperature, Day &

Night Weather Status.

Kat. Nr. 35.1127

Thank you for choosing this instrument from TFA.

Before you start using it

Please make sure to read the instruction manual carefully.

This information will help you to familiarise yourself with your new device, to learn all of its

functions and parts, to ﬁnd out important details about its ﬁrst use and how to operate it, and to

get advice in the event of faults.

Following and respecting the instructions in your manual will prevent damage to your

instrument and loss of your statutory rights arising from defects due to incorrect use.

We shall not be liable for any damage occurring as a result of non following of these

instructions. Likewise, we take no responsibility for any incorrect readings and for any

consequences which may result from them.

Please take particular note of the safety advice!

Please keep this instruction manual for future reference.

The Meteotime Weather Forecast Center provides a professional weather forecast for the

current and the next three days. The weather forecasts are made by professional meteorologists

and are sent out with the radio-time signal generator DCF77 in Germany and can be received

in almost all of Europe. The reception area for the radio-time signal generator is divided into a

total of 90 meteorological regions (60 regions with 4 day forecast, 30 regions with 2 day

forecast). The desired city is simply selected and the respectively current weather forecast for

the region is shown on the display. This gives you a quick overview of the weather situation for

the following days at any time. Updating the weather data is done every day.

This weather station allows the reception of weather data of the private provider Meteotime via

DCF without time limit and additional costs.

Meteotime is responsible for the dispatch and the correctness of the transmitted data.

60 regions with 4 days forecast (390 cities)

30 regions with 2 days forecast (80 cities)

Scope of delivery:

• Weather station (basic station)

• Outdoor transmitter

• Instruction manual

• Batteries

Field of operation and all the benefits of your new instrument at a glance

• Weather status for today and coming three days for 470 cities

• Rain/snow/hail probability

• Wind speed and wind direction

• 3 channel outdoor 433MHz wireless thermo-hygrometer (channel 1 sensor is included,

additional sensors are required for channels 2 and 3)

• Indoor thermo-hygrometer

• Maximum and minimum memories of temperature and humidity readings

• Temperature and humidity trends (UP/ FLAT/ DOWN)

• Temperature unit in degree C

• Regional day-time temperature and night-time temperature information

• 7-languages abbreviation (English/ Spanish/French/Italian/Dutch/Swedish/German)

• Critical weather alert

• Maximum of 5 cities’ weather information can be selected and displayed

• Personalized a place name / city

• Radio-controlled clock and calendar (24 hours format only)

• Time-zone setting

• Dual alarm (weekday alarm/single alarm will be sounded for 2 minutes)

• Programmable pre- alarm for outdoor sensor (Channel 1 only)

• Battery low indicator for main unit and wireless sensor

• Powered by 2 x AA batteries for main unit, and 2 x AAA batteries for the outdoor sensor

For your safety:

• This product is exclusively intended for the ﬁeld of application described above. It should

only be used as described within these instructions.

• Unauthorised repairs, modiﬁcations, calibrations or changes to the product are prohibited.

• This product is not be used for medical purpose or for public information, it is only intended

for home use.

Caution!

Risk of injury:

• Keep this instrument and the batteries out of the reach of children.

• Batteries must not be thrown into a ﬁre, short-circuited, taken apart or recharged. Risk of

explosion!

• Batteries contain harmful acids. Low batteries should be changed as soon as possible to

prevent damage caused by a leaking.

• Never use a combination of old and new batteries together, or batteries of diﬀerent types.

Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.

! Important information on product safety!

• Do not place your product near extreme temperatures, vibrations or shocks.

• The outdoor transmitter is protected against splash water, but is not watertight. Choose a

shady and dry position for the transmitter.

INTRODUCTION

The Meteotime weather station LCD display shows:

• Today weather information window

• In/outdoor temperature and humidity

• Tomorrow, one-day-after and two-day-after weather Information

• Information window which shows: Date, alarm time, cities, and critical weather information

description

GETTING STARTED

• Open the battery compartment of the outdoor transmitter and the basic station.

• Remove each battery insulation strips.

The event the Meteotime icon change to , that means there are potential sources of

interference on the unit. The sources of interference may come from the electronics equipment

such as TV-set, computers, household machines etc. It may also be due to lots of concrete,

metal parts and electrical equipment in the building. It may also be due to your living area if it

is very far away from the radio-controlled clock tower.

You are able to use the function to look for a better location TEST

• Press TEST button, is shown in the information window.SCAN

• Pick the unit to ﬁnd a good location.

• ﬂashing: The test is running and the Meteotime signal reception is good. You are able to

leave the device in this position.

ﬂashing: The test is running and the Meteotime signal reception is poor. You need to keep

on looking for a better location.

• The test lasted for around 1 minute. You can restart the test with the [ ] button at any TEST

time, and also discontinue the test by pressing the [ ] button.TEST

• Scan: the signal strength will be represented from 1 (very bad) to 9 (very good).

SWITCH CITY DATE ALARM

• After removing of the battery insulation strips, the weather station searches for the radio

cotrolled time signal as well as the Meteotime signal. After it has successfully received the

Meteotime signal, the display shows in the information windows the default city

“ ”.

• You are able to press [ ] to switch from the display of the city to date, weekday alarm, SET

single alarm and pre-alarm.

• The time and date signal will be received after a few minutes. Since there is a large amount of

weather information for all regions and days, the unit needs about 24 hours from the time of

the initial setup to complete the reception of all data.

• After the time and date signal is being received successfully, it shows “SELECT COUNTY”

and then “FRANKFURT” as default city in the information window.

To change the country and the city please see the information below.

• If the unit is able to receive the Meteotime signal successfully, the Meteotime icon

appears in the second row of the display. Otherwise, the Meteotime icon will be .

There are total 7 buttons on the main unit, namely:

SET

• Selected City Date Weekday Alarm “OFF W-ALM” Single alarm “OFF S-ALM”

Pre-Alarm“OFF P-ALM”

• Press and hold [ SET ] for 3 seconds to select your <1> Country, <2> Time Zone, <3>

Language, <4>Exit to city display mode

DAY/NIGHT

• Critical weather information Day/Night weather status change

• Read the critical weather information one by one.

▲

• Increasing the value during setting

• Turn ON the alarm

• Press and hold for 3 seconds to enforce a radio controlled clock DCF signal search

• Switch to next day’s weather information

▼

• Decreasing the value during setting

• Choose one of the pre-selected cities

• Turn OFF the alarm

• Press and hold for 3 seconds to enforce a wireless RF signal search from remote sensor

MEM

• Display the maximum and minimum measured temperature and humidity readings in record

• Press and hold for 3 seconds to clear all the Max. and Min. records

TEST √

• Find the place for the device which has a good reception

• Add the city into the list of your desired cities

• Remove the city out of the list of desired cities

• Edit your home town

CHANNEL

• Switch to read outdoor temperature and humidity readings of channels 1, 2 and 3

• Press and hold the button for 3 seconds to enter into auto circulation display mode “ ”

5 6

7 8

DAY/NIGHT

UP [ ]▲

WEATHER

WEATHER STATUS

There are total 15 weather statuses for day and 15 weather statuses for night.

flashing

SWITCH TO NEXT DAY’S WEATHER INFORMATION

For each press of the UP [ ] button, the user can switch and view the weather information ▲

from today to tomorrow, one-day-after and two-day-after.

SWITCH DAY WEATHER INFORMATION NIGHT WEATHER INFORMATION

The device is able to automatically switch to DAY-WEATHER and NIGHT-WEATHER

respectively. The user can press the [ DAY/NIGHT ] button to see the DAY-WEATHER (for

10-second period) if currently show the NIGHT-WEATHER, or vice versa.

Sometimes there is more than one critical weather information in the 4-days.

Press [ DAY/NIGHT ] button to read the critical weather information one by one. The special

icon of the day will be flashed when you read the Information.

• Press [ ] button to go back to the display of SET CITY DATE WEEKDAY

ALARM SINGLE ALARM PRE-ALARM. If you would like to read the weather

information in the information window, then press [ DAY/NIGHT ] button to display

Day Night weather information and also the critical weather information.

If no button is pressed, the critical weather information will be displayed, so as to make sure

you are aware of the critical weather details.

CRITICAL WEATHER INFORMATION

Meteotime weather signal contains the critical weather information such as: Gust, frozen, rain,

heavy snow, thunder, strong UV, dense fog, bise, mistral, etc. for today and coming three days.

A critical weather alert signal will be turned on in case that day has critical weather that the

user must know.

LOW BATTERY INDICATION

When it is time to replace batteries, the respective low-battery indicator (see graphics) will

appear next to the weather forecast for the display unit or next to the outdoor temperature for

the outside sensor.

Today’s weather

information:

Tomorrow’s weather

information:

One-day-after’s

weather information:

Two-day-after’s

weather information:

SELECT THE COUNTRY AND CITY / CITIES

• Press and hold [ ] button for 3 seconds , in the information window, is SET

shown, and then press [ ] or [ ] button to select the country. For example, if you see in ▲ ▼

the information window , that means you have selected “Germany”.

• Press [ ] button to confirm the country. Assuming you have selected Germany, then the SET

information window will show .

• Then, press [ ] or [ ] button to select the city, and the city name will be shown in the ▲ ▼

information window. Example: means the city ‘Frankfurt am Main’ .

• Press [ ] button to accept the setting. From now on, the selected city will be shown in SET

the information window.

ACTIVE FAVOURITES

Once you have set your city as described above, you may select more cities for easy access.

Instead of terminating the setting with the [ ] button, you continue as follows:SET

• If ‘Frankfurt am Main’ is your selection as one of your favorite cities, then press [ ] TEST √

button to confirm. A will be shown on top of your selected city, and it will be stored into √

your personal memory list.

• Now, you may press [ ] or [ ] button to select more cities in the same country, and then ▲ ▼

press [ ] button to confirm. TEST √

• If you wish to select cities from different countries, you have to exit the setting with [ ] SET

button and re-enter it again as described above in order to change the country.

• You may select maximum FIVE cities as favourites. If you want to add more cities, then

will be shown in the information window.

When all settings are done, press [ ] button to confirm and exit the setting mode.SET

REMARK: If after inserting the batteries for the ﬁrst time, you are skipping the city selection,

the product will select by default ”Frankfurt am Main” as your selected city.

DISPLAY OF FAVOURITES

If you have selected more than one city as favourite, as an example “Frankfurt am Main”,

“Paris” and “Stockholm”, then you are able to scroll through these cities by pressing [ ] ▼

button when the information window shows the CITY NAME (Press SET button until it shows

the city name).

REMOVE A CITY FROM THE LIST OF FAVOURITE

• Press and hold [ ] button for 3 seconds, is shown in the information SET

window, then press [ ] or [ ] button to select the country. ▲ ▼

• Press [ ] button to confirm the country.SET

• Then, press [ ] or [ ] button to go to your selected city with the ▲ ▼ √

• Press [ ] button to remove the . Now this city is removed from the favourites.TEST √√

• Repeat this if you wish to remove more cities from your list

• Now, you may also press [ ] or [ ] button to select another favourite city.▲ ▼

Once you have made all you changes, press [ ] button to quit. will be shown in SET

the information window. After 4 seconds, it will go to the City-Date-Time Mode.

PERSONALIZED A PLACE NAME

• Press and hold [ ] button for 3 seconds. In the information window, is SET

shown, and then press [ ] or [ ] button to select the country. For example, if you see in ▲ ▼

the information window , that means you have selected “Germany”.

• Press [ ] button to confirm the country. Assuming you have selected Germany, then the SET

information window will show .

• Then, press [ ] or [ ] button to select the city, and the city name will be shown in the ▲ ▼

information window. Example: means the city ‘Frankfurt am Main’ .

• Press the [ ] button ; a on the first position of the information windowMEM cursor ﬂashes

Then, please apply the following input commands:

Button Function

' ' or ' ' Selection of a letter▲ ▼

SET <1> Accept the selected letter and jumps to the next position.

<2> If you have not entered any letter (in other words, if only the cursor is

flashing at the last position), confirm the entry with this button and your

place will also be included in the memory with immediate effect

TEST One position back in the data entry process

** The place that you have selected to enter your own description will still exist under its own

name.

• Press [ ] button to confirm and exitSET

SET THE TIME ZONE AND LANGUAGES

• Press and hold [ ] button for 3 seconds, is shown in the information SET

window.

• Press [ ] button again, then is shown in the information window, SET

press [ ] or [ ] button to adjust the time zone.▲ ▼

• Press [ ] button again, then the LANGUAGE will be shown in the information window, SET

press [ ] or [ ] button to select your desired language. There are total seven languages ▲ ▼

for selection, namely German, English, Spanish, French, Italian, Dutch, Swedish

• Press [ ] button on last time, will be shown in the information window. After 4 SET

seconds, it will change to the City-Date-Time Mode

Remark: If you do not have any selection into the setup mode up to 30 seconds, it will

automatically exit the setup mode. The information window will show city/ date & alarm

9 10

1211

13 14

15 16

Produkt Specifikationer

Mærke:	TFA
Kategori:	Vejrstation
Model:	Meteotime Info
Bredde:	152 mm
Dybde:	27 mm
Højde:	125 mm
Vægt:	226 g
Produktfarve:	Sølv
Batterispænding:	1.5 V
Indbygget skærm:	Ja
Vejrudsigt:	Ja
Kan monteres på væggen:	Ja
Batteritype:	AA
Ur-funktion:	Ja
Alarmfunktion:	Ja
Antal understøttede sensorer (maks.):	3
DCF radiour:	Ja
Målefunktioner:	Indoor hygrometer,Indoor thermometer,Outdoor hygrometer,Outdoor thermometer
Trend visning af målefunktioner:	Hygrometer,Thermometer
Vejrstation, extremum data:	Hygrometer,Thermometer
Fugtigheds-måleområde (udendørs) (H-H):	1 - 99 %
Måle rækkevidde for luftfugtighed (inde) (H-H):	1 - 99 %
Temperatur måleområde (indendørs) (T-T):	-5 - 50 °C
Temperatur måleområde (udendørs) (T-T):	-20 - 60 °C
Udendørs sensorområde:	30 m
Antal batterier (modtager):	2