TK Audio Transceiver 2 Manual

TK Audio Ikke kategoriseret Transceiver 2

Læs gratis den danske manual til TK Audio Transceiver 2 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 15 anmeldelser. Har du et spørgsmål om TK Audio Transceiver 2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Transceiver 2

Universal insert station

www.tkaudio.se

The Transceiver 2 is a universal tool both in studio and on stage.

The main function is to convert balanced signals into unbalanced and back again

without losing any signal quality.

Each channel is equipped with a send level, return gain control, return polari-

ty switch and a blend control. With the new blend function you can choose how

much of the inserted effect you want to mix in. The Transceiver 2 is a transfor-

merless balanced design for the best possible signal handling, a flat frequency

response, low harmonic distortion and low noise.

Both the balanced output and the unbalanced send has a high driving capability to

drive input transformers.

• Insert your unbalanced gear such as guitar pedals and old echo fx into

your DAW or console via the Transceiver 2.

• Active Di-box with up to +20dB of gain. Plug your favorite instrument

into your collection of vintage gear via the Transceiver 2.

• A re-amping tool.

• A universal tool on stage. Connect balanced gear on stage between

your instrument and amp.

• Blend function for the inserted units.

www.tkaudio.se

Hook up a guitar pedal Use it as a 4 channel Di-box

Re-amping

Impedance and level matching

Adjust the send level so you

don’t overload the pedal, then

use the gain for level make-up

after the pedal.

1. Hook up your guitar and amp with a “Y”

splitter connected to the Transceiver 2 return.

Adjust the amp for your wanted sound and

use the Transceiver2 gain control to adjust the

level of the direct guitar signal that feeds your

2. The guitar signal can also be fed through your DAW

and then back to the amp.

Lower the send level control and move the cable that

feeds the amp to the send output instead. Now adjust

the send control so you get the same amp level as you

got when the amp was connected to the “Y” splitter.

By connecting the amp this way you can recreate the

sound from this set-up 100% by feeding the recorded

direct signal to the amp again (as long as the amp is the

same and controls adjusted the same).

Because of the high input impedance (1 Mohm)

it’s a perfect Di-box for bass and guitars with

passiv pickups. The balanced output can easily

drive a 600 ohm transformer balanced preamp

input.

Use your balanced studio gear on stage.

Use it as

a Di-box

with high

driving

capability.

Produkt Specifikationer

Mærke:	TK Audio
Kategori:	Ikke kategoriseret
Model:	Transceiver 2

Har du brug for hjælp?

Hvis du har brug for hjælp til TK Audio Transceiver 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret TK Audio Manualer

TK Audio DP3 Manual

26 Januar 2025

TK Audio T-Komp Manual

3 September 2024

TK Audio TK-lizer 2 Manual

3 September 2024

TK Audio TK-lizer 500 Manual

28 August 2024

TK Audio M/S Station Manual

28 August 2024

TK Audio BC1-THD Manual

27 August 2024

TK Audio BC501-GR Manual

21 August 2024

TK Audio Transceiver 2 Manual

5 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025