TK Audio TK-lizer 500 Manual

TK Audio Ikke kategoriseret TK-lizer 500

Læs gratis den danske manual til TK Audio TK-lizer 500 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om TK Audio TK-lizer 500, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
TK-lizer 500
500 series dual mono EQ with M/S function
Congratulations on buying the TK-lizer 500! It features all the power of the TK Audio’s flagship
TK-lizer, including the M/S functionality that has made it such a staple in studios all over the
world.
It’s manufactured and assembled by hand in Sweden and thoroughly tested before leaving
the factory.
The three bands have a cut/boost range of +/-8dB in 41 steps. The low and high bands
can be switched between peak or shelving mode. A high pass filter with a 12dB slope is
also provided, and each channel has it’s own level control with a range from infinity to
+6dB.
Using the built in M/S function, you can adjust the middle and side signals separately
before it is decoded back to a normal L/R signal. In M/S mode you can also adjust the
stereo width using the level controls.
Parameters:
Low band
Frequency: 28Hz, 48Hz, 72Hz, 132Hz, 195Hz, 255Hz
Boost/cut: +/-8dB
Peak or Shelf
Mid Band
Frequency: 400Hz, 630Hz, 870Hz, 1.3kHz, 2.4kHz, 4.8kHz.
Boost/cut: +/-8dB
High Band
Frequency: 4kHz, 7.2kHz, 12kHz, 16kHz, 20kHz, 25kHz, switchable between shelf or bell.
Boost/cut: +/-8dB
Peak or Shelf
High Pass Filter
Frequency: 25Hz, 30Hz, 35Hz, 40Hz, 45Hz, 100Hz, 12dB / octave.
In/Out
Level: Infinity to +6dB (Unity gain at 12’o lock)
EQ in/out. (LED red for out, green for in)
M/S in/out.
M/S mode:
When M/S mode is selected, the signal is encoded into M=mid ( L+R) and S=Side (L-R),
and after the EQ filters the signal is decoded back to conventional L and R.
By using the high pass filter in M/S mode you can affect the lower range in two ways:
1. HPF on M channel cuts the low energy on the mid signal – useful on program material
such as bass, drums and vocals.
2. HPF on S channel - frequencies below the selected frequency will be in mono, a
technique used when cutting records and to get a more focused low range.
In M/S mode you can also use the level controls to alter the stereo images. More S
channel will widen the image, and less S channel will reduce the stereo images.
If you turn down the “side” level all the way the signal will be mono.
Tip:
When working in stereo, to achieve the same settings on both channels you can use the
M/S function to ensure that L and R will be set the same way.
Installing:
Press on the left side of the panel when inserting the unit in a lunchbox!

Produkt Specifikationer

Mærke: TK Audio
Kategori: Ikke kategoriseret
Model: TK-lizer 500

Har du brug for hjælp?

Hvis du har brug for hjælp til TK Audio TK-lizer 500 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret TK Audio Manualer

TK Audio

TK Audio DP3 Manual

26 Januar 2025
TK Audio

TK Audio T-Komp Manual

3 September 2024
TK Audio

TK Audio TK-lizer 2 Manual

3 September 2024
TK Audio

TK Audio TK-lizer 500 Manual

28 August 2024
TK Audio

TK Audio M/S Station Manual

28 August 2024
TK Audio

TK Audio BC1-THD Manual

27 August 2024
TK Audio

TK Audio BC501-GR Manual

21 August 2024
TK Audio

TK Audio Transceiver 2 Manual

5 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive

Playtive IAN 304090 Manual

16 Juni 2025
Toorx

Toorx SRX-85 Manual

16 Juni 2025
Cable Matters

Cable Matters 180070 Manual

16 Juni 2025
Philips

Philips Avent SCD252 Manual

16 Juni 2025
Philips

Philips Q-Line 55BDL2050Q Manual

16 Juni 2025
EFX

EFX Delta DUDB4 Manual

16 Juni 2025
Foster

Foster Prep Station PS1000HR Manual

16 Juni 2025
OmniMount

OmniMount OBT60 Manual

16 Juni 2025
XO

XO D34HPBF Manual

16 Juni 2025
Janitza

Janitza 800-DI14 Manual

16 Juni 2025