TOA SP-201 Manual
TOA
Ikke kategoriseret
SP-201
Læs gratis den danske manual til TOA SP-201 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om TOA SP-201, eller vil du spørge andre brugere om produktet?
Side 1/4
INSTALLATION MANUAL
SP-131
SP-201
SP-301
Thank you for purchasing TOA's Speaker Mount Bracket.
Please carefully follow the instructions in this manual to ensure long,
trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
When Installing the Unit
• Install the unit only in a location that can structurally support the weight of the unit and the speaker. Doing
otherwise may result in the speaker falling down and causing personal injury and/or property damage.
• Do not useother methods than specied to mountthe unit. Extreme force is applied to the unitand the
speaker could fall off, possibly resulting in personal injuries.
• Use nuts and bolts that are appropriate for the wall's structure and composition. Failure to do so may cause
the speaker to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the unit has no loose joints after installation to prevent
accidents that could result in personal injury.
• Donotmounttheunitinlocationsexposedtoconstantvibration.Theunitcanbedamagedbyexcessive
vibration,potentiallycausingthespeakertofall,whichcouldresultinpersonalinjury.
• Do not use anti-rust lubricant. If it contacts resin or rubber parts, they could deteriorate and cause the unit to
fall, possibly resulting in personal injury.
SPEAKER MOUNT BRACKETS
When Installing the Unit
• Avoidtouchingtheunit'ssharpmetaledgetopreventinjury.
When the Unit is in Use
• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
• Havetheunitcheckedperiodicallybytheshopfromwhereitwaspurchased.Failuretodosomayresultin
corrosion or damage to the unit that could cause the unit to fall, possibly causing personal injury.
2. GENERAL DESCRIPTION
These Speaker Mount Brackets are designed to mount horn speakers or wide range speakers to walls or poles.
Pole mounting of the speaker requires addition of the optional YS-60B Pole Band.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
3. COMPONENT PARTS
4. INSTALLATION
4.1. SP-131 (Designed for pole mounting)
Quantity
SP-131* SP-201 SP-301
2
- -
-
1
-
- -
1
422
422
844
422
422
422
844
422
No.
1
2
3
4
5
6
7
8
9
10
11
Part name
SP-131 pole bracket
SP-201 base bracket
SP-301 base bracket
Hexagon bolt M8 x 20
Nut (for M8)
Plain washer (for M8)
Spring washer (for M8)
Hexagon bolt M10 x 25
Nut (for M10)
Plain washer (for M10)
Spring washer (for M10)
1
2
3
4
5
6
7
8
9
10
11
* The SP-131 contains 2 sets of brackets.
Step 1. Attach the SP-131 pole bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Mount the SP-131 pole bracket to
the pole by using the YS-60B Pole
Band.
Note
The YS-60B permits speaker mounting to
a pole of 9 to 34 cm in diameter.
Example of mounting reinforcement
If the installation location is susceptible to
vibrations or strong wind, use the SP-131 in
combination with 2 YS-60Bs to reinforce the
mounting strength as shown below.
SP-131 pole bracket YS-60B (option)
Reinforcing plate
Note: Separately prepare the one with 5 mm or
more in thickness.
Nut
Spring washer
Speaker's mounting bracket
Plain washers
SP-131 pole bracket
Hexagon bolt
SP-131 pole bracket
YS-60B (option)
Produkt Specifikationer
| Mærke: | TOA |
| Kategori: | Ikke kategoriseret |
| Model: | SP-201 |
Har du brug for hjælp?
Hvis du har brug for hjælp til TOA SP-201 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret TOA Manualer
22 Marts 2025
11 December 2024
25 September 2024
19 September 2024
19 September 2024
18 September 2024
6 September 2024
6 September 2024
4 September 2024
4 September 2024
Ikke kategoriseret Manualer
- I3-Technologies
- Anton/Bauer
- Scandes
- Smartwares
- Rival
- Denver
- Lamar
- Lansinoh
- Cognex
- Hidrate
- Energy Sistem
- TCW Technologies
- Best Fitness
- Accezz
- HQ Power
Nyeste Ikke kategoriseret Manualer
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025
11 August 2025