TOA VX-3000IM-EB Manual

TOA Ikke kategoriseret VX-3000IM-EB

Læs gratis den danske manual til TOA VX-3000IM-EB (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 2 anmeldelser. Har du et spørgsmål om TOA VX-3000IM-EB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

TOA Electronics Europe GmbH 1

d Instruction Manual

Loop-Isolator Monitor VX-3000IM-EB

Thank you for purchasing TOA’s Loop-Isolator Manager of the Integrated Voice Evacuation

System VX-3000.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your

equipment

1134

TOA Electronics Europe GmbH

Süderstraße 282, 20537 Hamburg, Germany

1134-CPR-195

DoP 21-004

EN 54-16: 2008

Fire Detection and fire alarm systems - part 16: Voice alarm control and

indication system for fire detection and fire alarm systems for buildings

Options:

Manual silencing of voice alarm condition

Manual reset of voice alarm condition

Voice alarm condition output

Indication of a fault related to voice alarm zones

Voice alarm manual control

Emergency microphones

Redundant power amplifiers

TOA Electronics Europe GmbH 
CONTENTS 
 SAFETY PRECAUTIONS .......................................................................... 3 
 GENERAL DESCRIPTION ........................................................................ 4 
 NOMENCLATURE .................................................................................. 5 
 INSTALLATION ...................................................................................... 5 
 CONNECTIONS ...................................................................................... 6 
1.  Loudspeaker Line Connections ............................................................................... 6 
1.1.  Connection between a single amplifier output and a single loop ................................. 6 
1.2.  Connection between a single amplifier output and a several loops .............................. 6 
2.  Connection of the Fault Outputs to the VX-3000F ................................................... 8 
 Settings in the VX-3000 Setting Software .............................................. 8 
1.  Relation between Control Inputs and Failure Outputs ............................................ 8 
2.  Software Settings .................................................................................................. 8 
2.1.  Basic Settings .................................................................................................................. 9 
2.2.  Surveillance Settings ....................................................................................................... 9 
2.3.  General Failure: Pattern Settings in Tab “Failure” ....................................................... 10 
 SPECIFICATIONS .................................................................................. 11 
 ACCESSORIES ....................................................................................... 11 
 
Remark: 
VX-3000F stands for any of the frames VX-3004F, VX-3008F and VX-3016F. 
   