Toshiba TL100 Manual

Toshiba SSD drev TL100

Læs gratis den danske manual til Toshiba TL100 (28 sider) i kategorien SSD drev. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Toshiba TL100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

Please be sure to check www.ocz.com for the latest ﬁrmware updates.

Note: The following instructions are a general guideline for the SSD installation and should act as a complement

to your system’s owner manual.

SSD HANDLING PRECAUTIONS

· To minimize static electricity, touch a metal surface before handling the SSD.

· Keep the drive away from direct sunlight, moisture, and extreme temperatures.

LAPTOP INSTALLATION

1. Power off the system, disconnect all power cables, and remove the battery.

2. Locate the hard drive access panel; unscrew and remove the access panel.

3. Disconnect and remove the current storage drive from the drive bay

(refer to your system’s user manual)

4. Remove all brackets and connectors from your HDD and install it on the SSD (if necessary).

Note: If a proprietary connector and/or bracket are present on the HDD, carefully remove it and connect it

to the SSD. Systems will vary and these items may or may not be present.

5. Insert the SSD into the drive bay carefully aligning the SSD with the SATA* connectors.

6. Secure the SSD in the drive bay. Reinstall the access panel and insert the battery back into the system.

7. Power on your system to verify a successful installation. For a boot drive, this is signiﬁed by the BIOS

prompting OS installation. For a secondary drive, follow the format instructions below.

Note: If the SSD will be your primary boot drive, please refer to your operating system’s user

manual for further OS installation instructions. If this SSD will be used as a secondary drive, formatting the

drive is required before use.

*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However, connecting a SATA 6Gbit/s

device into a SATA 3Gbit/s connection will result in reduced performance.

2.5-inch SATA 6Gbit/s SSD Manual

ISF-SSD2-SATA3-ML-V4

DESKTOP INSTALLATION

1. Power off the system and disconnect all power cables.

2. Remove the system’s outer panel (refer to your system’s user manual).

3. If your system provides a 2.5-inch drive bay(s), there is no need for a 3.5-inch adapter bracket.

4. If your system does not provide a 2.5-inch drive bay(s), you will need to mount the SSD in a 2.5-inch to

3.5-inch adapter bracket (3.5-inch adapter bracket included with select models).

5. Install the SSD into an available drive bay.

6. Connect one end of both the SATA* data cable and power cable to the SATA connectors on your

motherboard and the remaining ends to your SSD.

7. Reinstall the outer panel and reconnect the power cable to your PC.

8. Power on your system to verify a successful installation.

Note: If the SSD will be your primary boot drive, please refer to your operating system’s user manual

for further OS installation instructions. If this SSD will be used as a secondary drive, formatting the drive is

required before use.

*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However, connecting a SATA 6Gbit/s device

into a SATA 3Gbit/s connection will result in reduced performance.

FORMATTING THE SSD IN WINDOWS

Reformatting the Product may cause all the data stored in the Product to be lost or corrupted. Ensure the

Product contains no necessary data or ﬁles before reformatting.

1a. For Windows® 8.1 and Windows® 10:

· Enter the shortcut key “Windows key + X”.

· Select “Disk Management”.

1b. For Windows® 7:

· Click on the Windows Start Button, right-click “Computer” and select “Manage”. The “Computer

Management” window will pop up.

· On the left-hand menu (under “Storage”) select “Disk Management”.

Note: If a popup window appears asking you to initialize the disk. Click “OK”

2. Right-click the newly “unallocated” disk, then select “New Simple Volume” and follow the on-screen

instructions. Note: No change is needed to default Simple Volume settings.

3. Click “Finish” when prompted.

4. The SSD is now formatted and ready for OS installation.

FAQ

Q: Is TRIM supported on my OCZ Series SSD?

A: Yes, your OCZ Series SSD features TRIM support, but your operating system must also natively support

TRIM for this feature to function properly.

Q: Why does my drive seem to be running slow?

A: Even though your SSD is compatible with previous generations of the SATA interface, it must be attached

to a SATA 6Gbit/s connection for maximum performance.

Q: Where can I ﬁnd the SSD Utility to update ﬁrmware, secure erase, and check drive information?

A: You can download the SSD Utility for your product at http://www.ocz.com/consumer/download

Q: What operating systems are compatible?

A: Windows® 7, Windows® 8.1, Windows ® 10

Linux® Fedora®

21, Mint 17.1, elementary® OS Freya, openSUSE® 13.2, Ubuntu® 14.04, Ubuntu® 14.10

MAC OS X

® 10.9, 10.10, 10.11

Produkt Specifikationer

Mærke:	Toshiba
Kategori:	SSD drev
Model:	TL100
Bredde:	69.85 mm
Dybde:	100 mm
Højde:	7 mm
Vægt:	37.5 g
Produktfarve:	Grey,White
Opbevaringstemperatur (T-T):	-40 - 85 °C
Driftstemperatur (T-T):	0 - 70 °C
Certificering:	CE, BSMI, RCM, KCM, UL, RoHS2
HDD kapacitet:	120 GB
Læsehastighed:	550 MB/s
Skrivehastighed:	530 MB/s
Bæredygtighedscertifikater:	RoHS
Understøttede Mac-operativsystemer:	Mac OS X 10.10 Yosemite,Mac OS X 10.11 El Capitan,Mac OS X 10.9 Mavericks
Understøttede Linux-operativsystemer:	Fedora 22,Fedora 23,Linux Mint 17,Ubuntu 14.04
Grænseflade:	Serial ATA III
Intern:	Ja
Driftsspænding:	5 V
Strømforbrug (dvale):	0.01 W
SDD-kapacitet:	120 GB
SSD-formfaktor:	2.5"
Hukommelsestype:	TLC
NVMe:	Ingen
Komponent til:	PC
Tilfældig læsning (4KB):	85000 IOPS
Tilfældig skrivning (4KB):	80000 IOPS
Gennemsnitstid mellem fejl (MTBF):	1500000 t
Understøtter S.M.A.R.T.:	Ja
Understøttelse af TRIM:	Ja
Dataoverførselshastighed:	6 Gbit/sek.
Strømforbrug (gennemsnitlig):	1.6 W
Driftsvibrationer:	2.03 G
Stød under drift:	1500 G
Strømforbrug (inaktiv):	0.44 W
Overførselshastighed for HDD-grænseflade:	6 Gbit/sek.
TBW bedømmelse:	30
Skriv søgetid:	530 ms
Læs søgetid:	550 ms
Udholdenhedsvurdering (3 år):	27 GB/dag