TP-Link Festa F65 Manual

TP-Link Adgangspunkt Festa F65

Læs gratis den danske manual til TP-Link Festa F65 (2 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 10 anmeldelser. Har du et spørgsmål om TP-Link Festa F65, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Installation Guide

Wireless Access Point

Note: Festa F65 is used as an example throughout the Guide. Images may dier from your actual product.

The Festa AP can be mounted to the ceiling, the wall, or in a junction box, using the screws in

the package. Choose the appropriate mounting and installation steps below.

Note: This product requires heat dissipation through the metal bracket during use, please be

careful not to touch the metal bracket in the heat dissipation.

Hardware Installation

RESET

With the device powered on, press and hold the button for about 5 seconds until the LED flashes quickly. Then

release the button. The device will restore to factory default settings.

Ethernet Port: ETH (PoE)

The port is used to connect to a router/gateway or a switch to transmit data, or to a PSE (Power Sourcing

Equipment), such as a PoE switch, for both data transmission and Power over Ethernet (PoE) through Ethernet

cable.

Power Port

Plug one end of the power adapter to this port and the other end to a standard electrical wall outlet to power the

Festa AP.

Note: Power adapter is not included in the package contents of certain models. For details, refer to the product specications or

datasheet. For power supply specications, refer to the product label.

Rear Panel

Option 2: Wall MountingOption 1: Ceiling Mounting Option 3: Junction Box Mounting

Remove the ceiling tile.

Note: Make sure that the ceiling tile is larger than the Festa AP.

Wing NutsWashers Pan-head Screws

Option 1: Ceiling Mounting

Connect the Ethernet cable to the Ethernet port.

Please pay attention to the triangle sign. Attach

the Festa AP to the mounting bracket, then rotate

it until it locks into place, as shown on the left.

Place the mounting bracket in the center of the

ceiling tile. Mark positions for the screw holes

and a location for the Ethernet cable hole.

Drill holes for the screws and a hole for the

Ethernet cable at the marked positions.

Secure the mounting bracket to the ceiling tile

using pan-head screws, washers, and wing nuts,

as shown on the left.

Feed the Ethernet cable through the hole and

set the ceiling tile back into place.

Φ 25 mm (63/64 in)

Φ 4 mm (5/32 in)

Self-tapping ScrewsPlastic Wall Anchors

Insert the plastic wall anchors into the holes.

Option 2: Wall Mounting

Attach the Festa AP to the mounting bracket

by rotating it until it locks into place, as shown

on the left.

Secure the mounting bracket to the wall by

driving the self-tapping screws into the

anchors. Make sure that the shoulders of the

mounting bracket are on the outside.

If your Ethernet cable feeds through the wall,

position the mounting bracket below the cable

hole. Mark positions for the screw holes and

drill holes at the marked positions.

Φ 7.6 mm (19/64 in)

Connect the Ethernet cable to the Ethernet

port on the Festa AP.

Hardware Overview

Front Panel

On:

Working normally/Initializing.

Flash: • Flash twice:

Initialization is completed.

• Flash quickly:

The Festa AP is resetting, or the Festa controller is locating the

device*.

• Flash once per second:

The Festa AP is upgrading.

• Flash Slowly:

The Festa AP is in the isolated state.

LED Indicator

Off:

Working abnormally/Power o/LED is turned o.

* When the Locate feature is activated in the Festa controller, the LED will ash quickly for 10 minutes to help you

locate and identify the device. You can disable this feature manually to stop the device from ashing.

Conguration via Festa Cloud-Based Controller

You can easily configure and manage Festa APs via the Festa Cloud-Based Controller.

The Festa AP can be powered via a power adapter or a PSE device (such as a PoE switch) which complies with Power Source Class 2 ( PS2) or Limited Power Source (LPS) of IEC 62368-1.

Power Supply

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended.

• Adapter shall be installed near the equipment and shall be easily accessible.

For the detailed configurations, refer to the User Guide of the controller. The guide can be

found on the download center of our official website:

https://www.tp-link.com/support/download/?type=smb.

For technical support, the user guide and other information,

please visit https://www.tp-link.com/support/?type=smb, or simply

scan the QR code.

To ask questions, find answers, and communicate with TP-Link users or engineers,

please visit https://community.tp-link.com/business to join TP-Link Community.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of

directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of

the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

1. Download and install the Festa App from App Store or Google Play.

Scan for Festa App Festa App

2. Launch the Festa App and log in with your TP-Link ID.

3. Tap on the upper right corner, then + you will see you have successfully

registered for a Cloud-Based Controller and the controller has been added

to the controller list.

4. Tap , tap Confirm Let’s Get Started and follow the step-by-step instructions

to complete the conguration wizard of the controller.

5. On the controller’s management page, go to Devices + , and click on the

upper right corner, and follow the step-by-step instructions to adopt the

Festa AP.

Now you can configure and manage the Festa AP via the Festa App.

1. Make sure that your management device can access the internet.

2. Launch a web browser and enter https://festa.tplinkcloud.com in the address

bar. Log in with your TP-Link ID.

3. + Add ControllerClick , then you will see you have successfully registered for a

Cloud-Based Controller and the controller has been added to the controller list.

4. Set Up Now Config New Setup Click , click and follow the step-by-step

instructions to complete the conguration wizard of the controller.

5. On the controller’s management page, go to Devices + Add Devices , and click

and follow the step-by-step instructions to adopt the Festa AP.

Now you can configure and manage the Festa AP on the controller.

https://festa.tplinkcloud.com

Connect the Ethernet cable to the Ethernet

port on the Festa AP.

Attach the Festa AP to the mounting bracket

by rotating it until it locks into place, as shown

on the left.

Option 3: Junction Box Mounting

Prepare the cables and the junction box in advance. Ensure that the mounting holes align

to your junction box.

Route the cables through the square cable

hole on the mounting bracket, and secure the

mounting bracket to the junction box using

screws.

*Compatible wall junctions:

Option 2: Via Power Adapter

Plug one end of the power adapter into the power port of the Festa AP and the other end

to a standard electrical wall outlet.

Note: Power adapter is not included in the package contents of certain models. For details, refer to the product specications or

datasheet. For power supply specications, refer to the product label.

Option 1: Via PoE Switch

Connect an Ethernet cable from the PoE switch to the Ethernet port.

Note: For PoE power supply specications, refer to the product label.

PoE Switch Switch

Option1: Via a Web Browser Option 2: Via Festa App

Power Adapter

Switch

Router / Gateway

Festa Cloud

Clients

APAP AP AP

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Adgangspunkt
Model:	Festa F65

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Festa F65 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Adgangspunkt TP-Link Manualer

TP-Link Omada EAP115-Wall Manual

30 December 2025

TP-Link Festa F65-Outdoor Manual

11 December 2024

TP-Link RE6000XD Manual

4 December 2024

TP-Link Festa F65-Wall Manual

3 Oktober 2024

TP-Link EAP110-Outdoor V3 Manual

1 Oktober 2024

TP-Link WBS210 Manual

11 September 2024

TP-Link CAP300 Manual

10 September 2024

TP-Link Archer T2U Manual

10 September 2024

TP-Link Festa F65 Manual

2 September 2024

TP-Link Omada EAP110-Outdoor Manual

2 September 2024

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer

Cudy AP11000 Manual

3 Juni 2025

Planet WDAP-C5100BE Manual

5 April 2025

Peplink AP One AX Manual

20 Marts 2025

Cisco Aironet 3600i Manual

15 Januar 2025

Cisco Aironet 3600e Manual

13 Januar 2025

Luxul P40 Manual

13 Januar 2025

Luxul XAP-1440 Manual

13 Januar 2025

Ubiquiti Networks UniFi AP Flex HD Manual

12 Januar 2025

D-Link DBT-900AP Manual

26 December 2024

D-Link AirPro DWL-6000AP Manual

23 December 2024