TP-Link Omada Pro S4500-8GHP2F Manual

TP-Link Skifte Omada Pro S4500-8GHP2F

Læs gratis den danske manual til TP-Link Omada Pro S4500-8GHP2F (20 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om TP-Link Omada Pro S4500-8GHP2F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Installation Guide

Omada Pro Smart Switch

Business Networking Solution

About this Installation Guid

This Installation Guide describes the hardware characteristics, in

points that should be attended to during the installation. This Install

follows:

Chapter 1 Introduction

This chapter describes the external components of the switch.

Chapter 2 Installation

This chapter illustrates how to install the switch.

Chapter 3 Connection

This chapter illustrates how to do the physical connection of the sw

Chapter 4 Configuration

This chapter illustrates how to configure the switch.

Appendix A TroubleshootingAppendix B Hardware Specifications

Audience

This Installation Guide is for:Network Engineer Network Administrator

Conventions

• Some models featured in this guide may be unavailable in your country or region. For local salesinformation, visit https://www.tp-link.com.• The figures in Chapter 2, Chapter 3 and Chapter 4 are for demonstration purposes only. Your switch may differ in appearance from that depicted.• PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.• This guide uses the specific formats to highlight special messages. The following table lists the notice icons that are used throughout this guide.

Remind to be careful. A caution indicates a potential which may result in device damage. Remind to take notice. The note contains the helpful information for a better use of the product.