TP-Link Omada Pro S4500-8GP2F Manual

TP-Link Skifte Omada Pro S4500-8GP2F

Læs gratis den danske manual til TP-Link Omada Pro S4500-8GP2F (6 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om TP-Link Omada Pro S4500-8GP2F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Omada Pro Gigabit Smart Switch

1. To access the management page of the switch, open a browser and type

the switch’s IP address in the address eld, then press the Enter key.

If the switch obtains IP address from the DHCP server (typically a router), nd

the switch’s IP address on the DHCP server.

If not, use the default IP address to launch the switch’s 192.168.0.1

management page.

Note: Make sure the switch and computer are in the same subnet.

2. admin Enter for both the username and password in the lower case letters

to log in. The rst time you log in, change the password to better protect

your network and devices.

3. After a successful login, the main page will appear. You can click the menus

on the top side and left side to congure the corresponding functions.

Installation Guide

Conguration

LED Explanation

For the detailed congurations, refer to the User Guide and CLI Guide. The

guides can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Method 1: Standalone Mode

Switch PC

In Standalone Mode, use a computer to congure and manage the switch.

The switch supports two conguration methods:

Standalone Mode: Congure and manage the switch singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our

ocial website: https://www.tp-link.com/support/download/.

Note:

1. PoE ports can also connect to non-PoE devices, but only transmit data.

2. Maximum PoE power is 30 W for each PoE port, and 62 W (for S4500-8GP)/61 W (for S4500-8GP2F) for all PoE ports.

3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as

a result of client limitations and environmental factors.

For simplicity, we will take S4500-8GP2F for example throughout the Guide.

Note:

1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) which

complies with LPS or PS2 standard and 802.3af/at standard.

2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will

supply power instead.

Ethernet Ports (1–8)

AC Power Cord

DC Power Adapter

Internet

PSE

LED S Explanationtatus

P erow

On Power on

S temys

F F Systlashing lashing: em running normally

Link/Act

(port 1–8)

On (Green) Running at 1000 Mbps

On (Yell w) Running at 10/100 Mbpso

F Transmitting/receiving datalashing

No connected device

SPF1/SFP2

(For S4500-

8GP2F)

On (Green) Running at 1000 Mbps

On (Yell w) Running at 100 Mbpso

F Transmitting/receiving datalashing

No connected device

PoE Status

(For Port 1-4 of

S4500-8GP/Port

1-8 of S4500-

8GP2F)

On Providing PoE power

Flashing

Current-ov rt-cir t/Connected erload/Sho cui

to a non-standard PD/Power exceeded the

Not providing PoE Power

PoE MAX

(For S4500-8GP/

S4500-8GP2F)

On Remaining power supply ≤ 7W

Flashing Remaining pow k for er supply eeps ≤ 7 W

mor tese than 2 minu

Remaining power supply

> 7W

Connection for PoE Switch

Ethernet Ports (1–8)

PC IP Camera AP IP Phone

PoE Devices

DC Power Adapter

AC Power Cord

Internet

SFP Slots

Connection for Non-PoE Switch

For simplicity, we will take S4500-8G for example throughout the Guide.

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Skifte
Model:	Omada Pro S4500-8GP2F

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Omada Pro S4500-8GP2F stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte TP-Link Manualer

TP-Link Omada ES210GMP Manual

2 Januar 2025

TP-Link TL-SG605 Manual

10 December 2024

TP-Link Festa FS328G Manual

3 Oktober 2024

TP-Link Festa FS352GP Manual

3 September 2024

TP-Link Festa FS310GP Manual

2 September 2024

TP-Link Festa FS308G Manual

2 September 2024

TP-Link Festa FS328GP Manual

2 September 2024

TP-Link Festa FS308GP Manual

2 September 2024

TP-Link LS106LP Manual

31 August 2024

TP-Link LS105LP Manual

31 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025