TP-Link TL-SG1006PP Manual
Læs gratis den danske manual til TP-Link TL-SG1006PP (3 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om TP-Link TL-SG1006PP, eller vil du spørge andre brugere om produktet?
Side 1/3
- With 3 PoE+ and 1 PoE++ ports, transfers data and power on one single cable
- Working with IEEE 802.3af/at/bt compliant PDs, expands your network
- Supports PoE power up to 60 W for PoE++ port and 30 W for each PoE+ port
- Supports PoE power up to 64 W* for all PoE ports
- Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance
system
- With PoE Auto Recovery, the switch will automatically reboot your dropped or unresponsive
PoE-powered devices connected to port 1–4
- Requires no conguration and installation
- Fanless Design
- Supports desktop and wall mountable installation methods
Highlights
6-Port Gigabit Desktop Switch
with 3-Port PoE+ and 1-Port PoE++
Overview
TL-SG1006PP is an unmanaged switch with 6 Gigabit ports that requires no conguration and provides
4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE
802.3af/at/bt compliant Powered Devices (PDs) at port 1 and IEEE 802.3af/at compliant Powered
Devices (PDs) at port 2-4. In this situation, the electrical power is transmitted along with data in one
single cable allowing you to expand your network to where there are no power lines or outlets, where
you wish to x devices such as APs, IP Cameras or IP Phones, etc.
Power Over Ethernet
4 RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. They can
automatically detect and supply power with those IEEE 802.3af/at/bt compliant Powered Devices (PDs)
at port 1 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 2-4.
Overload Arrangement
TL-SG1006PP has the priority function which will help protect the system when the system power is
overloaded. If all PoE PDs power consumption is ≥ 64 W*, a priority will be arranged among the PoE
ports, then the system will cut o the power of the lowest-priority port.
Intelligent Power Management
Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system
power is overloaded. For example, port 2, 3, and 4 is using 18 W respectively (maximum power per port
is 30 W); the system power is 54 W in total. If there is an additional PD inserted to port 1 with 25 W, and
then the system will cut o the power of port 4 because of the overloaded power, this means port 2
and 3 will use 18 W respectively and port 1 will use 25 W, no power will be supplied to port 4.
Highlight Performance
• Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-2.
• With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered
devices (PD) for port 1-4. When the switch nds that a PD stops sending data packets to the switch
for a long period, the switch will reboot it automatically.
TL-SG1006PP is easy to install and use. It requires no conguration and installation. With desktop and
wall mountable design, outstanding performance and quality, the TP-Link 6-Port Gigabit Desktop
Switch with 3-Port PoE+ and 1-Port PoE++ TL-SG1006PP is a great selection for expanding your
network.
Easy to Use
Produkt Specifikationer
| Mærke: | TP-Link |
| Kategori: | Skifte |
| Model: | TL-SG1006PP |
Har du brug for hjælp?
Hvis du har brug for hjælp til TP-Link TL-SG1006PP stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skifte TP-Link Manualer
2 Januar 2025
10 December 2024
3 Oktober 2024
3 September 2024
2 September 2024
2 September 2024
2 September 2024
2 September 2024
31 August 2024
31 August 2024
Skifte Manualer
- Intertechno
- Kraus & Naimer
- CSL
- Tesla
- Extreme Networks
- Ernitec
- Doepke
- EnGenius
- PAC
- Suevia
- Noble
- Renkforce
- Yamaha
- Dahua Technology
- BZBGear
Nyeste Skifte Manualer
4 April 2025
4 April 2025
4 April 2025
3 April 2025
3 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025