Tripp Lite PowerVerter RV1512UL Manual

Tripp Lite Batteri PowerVerter RV1512UL

Læs gratis den danske manual til Tripp Lite PowerVerter RV1512UL (24 sider) i kategorien Batteri. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Tripp Lite PowerVerter RV1512UL, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
Owner’s Manual
Quiet Mobile Power
Congratulations! You've purchased the most advanced, feature-rich Inverter/Charger designed for recreational applications. Tripp Lite
PowerVerter Inverter/Chargers are the quiet alternative to generators—with no fumes, fuel or noise to deal with! You get AC electricity
anywhere and anytime you need it: away from shore power, rolling down the highway, dry camping in majestic back country or overnighting
at a non-electric site. Your Tripp Lite Inverter/Charger provides your appliances, equipment and electronics with utility- or generator-supplied
AC electricity (filtered through premium ISOBAR
®
surge protection) whenever available. In addition, it automatically powers your craft's 12V
system and recharges your connected battery bank—doing what traditional converter/chargers do. Whenever power blackouts, brownouts or
high voltages occur, your Inverter/Charger automatically switches over to inverting battery output to power connected AC equipment.
Better for Your Equipment Premium Protection Levels
• Built-In ISOBAR
®
Surge Protection
• Automatic Overload Protection
Ideal Output for All Loads
• Frequency-Controlled Output
• Automatic Load Switching
• Balanced Load Sharing
Better for Your Batteries Faster Battery Recharge
• High-Amp, 3-Stage Battery Charger (adjustable)
Critical Battery Protection
• Battery Charge Conserver (Load Sense)
• Battery Temperature Sensing
• High-Efficiency DC-to-AC Inversion
Better for You Quiet, Simple, Maintenance-Free Operation
• Multi-Function Lights & Switches
• Automatic Generator Starting
• Moisture-Resistant Construction*
Safety 2
Feature Identification 3
Operation 4-5
Configuration 5-7
Battery Selection 8
Mounting 9
Battery Connection 10
AC Input/Output Connection 11
Service/Maintenance 11
Troubleshooting 12
Warranty/Warranty Registration 12
Français 13
PowerVerter
®
DC-to-AC
Inverter/Charger
Input Output
Invert: 12 VDC 120V, 60 Hz. AC
Charge: 120V, 60 Hz. AC 12 VDC
1111 W. 35th Street, Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
* Inverter/Chargers are moisture-resistant, not waterproof.
Copyright © 2007. All rights reserved. PowerVerter
®
is a registered trademark of Tripp Lite.
Contents
WARRANTY
REGISTRATION
Register online today for
a chance to win a FREE Tripp Lite
product! www.tripplite.com/warranty
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS!
This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite
Inverter/Chargers.
Location Warnings
• Although your Inverter/Charger is moisture resistant, it is NOT waterproof. Flooding the unit with water will cause it to short circuit
and could cause personal injury due to electric shock. Never immerse the unit, and avoid any area where standing water might
accumulate. Mounting should be in the driest location available.
• Leave a minimum of 2" clearance at front and back of the Inverter/Charger for proper ventilation. To avoid automatic Inverter/Charger
shutdown due to overtemperature, any compartment that contains the Inverter/Charger must be properly ventilated with adequate
outside air flow. The heavier the load of connected equipment, the more heat will be generated by the unit.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the
unit's internal cooling, eventually causing product damage not covered under warranty.
• Do not install the Inverter/Charger directly near magnetic storage media, as this may result in data corruption.
• Do not install near flammable materials, fuel or chemicals.
Battery Connection Warnings
• Multiple battery systems must be comprised of batteries of identical voltage, age, amp-hour capacity and type.
• Because explosive hydrogen gas can accumulate near batteries if they are not kept well ventilated, your batteries should not be
installed (whether for a mobile or stationary application) in a “dead air” compartment. Ideally, any compartment would have some
ventilation to outside air.
• Sparks may result during final battery connection. Always observe proper polarity as batteries are connected.
• Do not allow objects to contact the two DC input terminals. Do not short or bridge these terminals together. Serious personal injury
or property damage could result.
Equipment Connection Warnings
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this
equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
• You may experience uneven performance results if you connect a surge suppressor, line conditioner or UPS system to the output of
the Inverter/Charger.
• Tripp Lite recommends wiring the AC output to a GFCI protector (ground fault circuit interrupter).
• The main grounding lug should be connected to the vehicle chassis with an 8 AWG wire (minimum).
Operation Warnings
• Your Inverter/Charger does not require routine maintenance. Do not open the device for any reason. There are no user serviceable parts inside.
• Potentially lethal voltages exist within the Inverter/Charger as long as the battery supply and/or AC input are connected. During any
service work, the battery supply and AC input connection (if any) should therefore be disconnected.
• Do not connect or disconnect batteries while the Inverter/Charger is operating in either inverting or charging mode. Operating Mode
Switch should be in the DC OFF position. Dangerous arcing may result.
Caution: These models have a failsafe AC pass-through feature where the AC output will be live (if AC input is
available) even though the operating mode switch is set to DC OFF.
Caution: If your Inverter/Charger is mounted in a location that lacks proper ventilation, the surface of the metal
enclosure could become hot. Allow to cool before touching. If the Inverter/Charger must be installed in a location
that lacks proper ventilation, mount the unit in such a way that the top of the metal enclosure will not be subjected
to accidental contact during operation.

Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Batteri
Model: PowerVerter RV1512UL

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite PowerVerter RV1512UL stil et spørgsmål nedenfor, og andre brugere vil svare dig


Batteri Tripp Lite Manualer

Tripp Lite

Tripp Lite UT2012UL Manual

1 August 2025
Tripp Lite

Tripp Lite APSWX6KP48VMPPT Manual

1 August 2025
Tripp Lite

Tripp Lite PowerVerter Plus PV2400FC Manual

1 August 2025
Tripp Lite

Tripp Lite PINV600SW-120 Manual

1 August 2025
Tripp Lite

Tripp Lite HCRK-36 Manual

31 Juli 2025
Tripp Lite

Tripp Lite APSWX4KP48VMPPT Manual

31 Juli 2025
Tripp Lite

Tripp Lite APS2448UL Manual

31 Juli 2025
Tripp Lite

Tripp Lite PINV2000SWL-120 Manual

31 Juli 2025
Tripp Lite

Tripp Lite PINV750 Manual

31 Juli 2025
Tripp Lite

Tripp Lite PowerVerter PV375 Manual

31 Juli 2025

Batteri Manualer

Nyeste Batteri Manualer

Milwaukee

Milwaukee M12 48-59-2401 Manual

12 August 2025
Snow Joe

Snow Joe 24V-SS12-BDL Manual

12 August 2025
Makita

Makita PDC1200 Manual

11 August 2025
Sony

Sony LBP-HM1 Manual

10 August 2025
Ozito

Ozito PXBP-340 Manual

9 August 2025
Milwaukee

Milwaukee M12 B2 Manual

9 August 2025
Milwaukee

Milwaukee MXF HD812 Manual

8 August 2025
APC

APC LIBSMG95SUL1PH Manual

6 August 2025
Blaupunkt

Blaupunkt CR2016 Manual

4 August 2025
Blaupunkt

Blaupunkt CR2025 Manual

4 August 2025