Tripp Lite UT2012UL Manual

Tripp Lite Batteri UT2012UL

Læs gratis den danske manual til Tripp Lite UT2012UL (12 sider) i kategorien Batteri. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Tripp Lite UT2012UL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Owner’s Manual

Safety/Warranty/Warranty Registration 2

Feature Identification 3

Operation 3-4

Configuration 5-6

Battery Selection 7

Mounting 8

Battery Connection 9

AC Input/Output Connection 10

Service/Maintenance 11

Troubleshooting 11

Tripp Lite Utility/

Work Truck DC-to-AC Inverters

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

* See "Utilize Automatic Generator Starter Capability" in the Configuration section for details. ** Depending on power needs, users may wish to complement a Tripp Lite Utility/Work Truck Inverter

Contents

POWER BOOSTER!

Includes built-in charger for optional overnight recharging

of vehicle battery from shore power!

Quiet, Economical Mobile Power…

Congratulations! You've purchased one of the most advanced, feature-rich Inverters designed for utility/work truck applications. Tripp Lite Utility/Work Truck

Inverters provide quiet, convenient mobile power for every application: computers, TVs, electronic test equipment, power tools, pumps, compressors, blowers,

lights, power supplies, radios, cell phone chargers and more. Since Tripp Lite Inverters draw power directly from vehicle batteries, they are the quiet, economical

power alternative in residential environments or late-night job sites—without the noise, fumes, capital outlays, maintenance costs and occasional power overkill

of generators! For generator-equipped trucks, they provide crews with the option of silent power.*

…With Optional Power-Boosting Functionality

In today's cost-cutting climate, fleet managers must get the most out of every vehicle—keeping trucks in the field longer, operating an ever-growing array of

power tools. Standard vehicle alternators and batteries, however, often can't keep up with the increased power demand. When alternators recharge batteries at

a slower rate than they are discharged, that leaves a power deficit for the next day's jobs and dramatically shortens battery service life. Tripp Lite Utility/Work

Truck Inverters, with the addition of a built-in battery charger, help to overcome this power deficit. When optionally connected to shore power at the end of the

day, Tripp Lite Utility/Work Truck Inverters quickly and safely recharge vehicle batteries, ensuring that maximum power is available for the next day's service

schedule.** In addition, Tripp Lite Utility/Work Truck Inverters out-muscle other inverters on the market with peak power—handling tough loads like motors,

compressors and incandescent lamps with ease.

Rugged Reliability Stands Up to Demanding Service Fleet Applications

• Powers everything from lights and power tools to sensitive testing equipment with frequency-controlled output

• Operates under the most severe conditions with heavy-duty, weather-resistant construction which meets tough marine standards for shock, vibration and

moisture resistance***

• Enhances crew safety in moist environments with dual GFCI outlets (on select models)

• Delivers more AC power from your truck's system with high-efficiency DC-to-AC inversion

• Saves precious vehicle space with compact cabinet size

Battery Charger (Built-In) Provides Optional Overnight Charging

• Boosts battery to full charge for next day's jobs (on a routine or "as-needed" basis)

• Extends battery service life with safe, 3-stage charging and battery temperature-sensing function (featured on select models)

Remote Module (Included) Enables Convenient Control and Monitoring From Vehicle Cab

• Monitor battery voltage level and Inverter operating status

• Activate or deactivate Inverter with ease

WARRANTY

REGISTRATION:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

Important Safety Instructions

Location Warnings

• The Inverter must be located in an enclosed compartment, shielded

from outside weather conditions.

• Although your Inverter is moisture resistant, it is NOT water-proof.

Flooding the unit with water will cause it to short circuit and could

cause personal injury due to electric shock. Never immerse the unit,

and avoid any area where standing water might accumulate. Mounting

should be in the driest location available.

• Leave a minimum of 2" clearance at front and back of the Inverter for

proper ventilation. To avoid automatic Inverter shutdown due to

overtemperature, any compartment that contains the Inverter must

properly ventilated with adequate outside air flow. The heavier the load

of connected equipment, the more heat will be generated by the unit.

• Do not install the Inverter directly near magnetic storage media, as this

may result in data corruption.

• Do not install near flammable materials, fuel, chemicals or gasses

Battery Connection Warnings

• The Inverter will not operate (with or without utility power) until

batteries are connected.

• Multiple battery systems must be comprised of batteries of identical

voltage, age, amp-hour capacity and type.

• Because explosive hydrogen gas can accumulate near batteries if they

are not kept well ventilated, your batteries should not be installed in a

“dead air” compartment. Ideally, any compartment would have some

ventilation to outside air.

• Sparks may result during final battery connection. Always observe

proper polarity as batteries are connected.

• Do not allow objects to contact the two DC input terminals. Do not

short or bridge these terminals together. Serious personal injury or

property damage could result.

Equipment Connection Warnings

Do not use a Tripp Lite Inverter in life support or healthcare

applications where a malfunction or failure of a Tripp Lite Inverter

could cause failure of, or significantly alter the performance of, a

life support device or medical equipment.

• You may experience uneven performance results if you connect a surge

suppressor, line conditioner or UPS system to the output of the Inverter.

• Corded Models: Do not modify the Inverter’s plug or receptacle in a

way that eliminates its ground connection. Do not use power adapters

that will eliminate the plug’s ground connection.

• Connect your Inverter only to a properly grounded AC power outlet or

hardwired source. Do not plug the unit into itself; this will damage the

device and void your warranty.

Operation Warnings

• Your Inverter does not require routine maintenance. Do not open the

device for any reason. There are no user serviceable parts inside.

• Potentially lethal voltages exist within the Inverter as long as the

battery supply and/or AC input are connected. During any service

work, the battery supply and AC input connection (if any) should

therefore be disconnected.

• Do not connect or disconnect batteries while the Inverter is operating

in either inverting or charging mode. Dangerous arcing may result.

Operating Mode Switch should be in the OFF position.

SAVE THESE INSTRUCTIONS!

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite Inverters.

Limited Warranty

Tripp Lite warrants its Inverters to be free from defects in materials and workmanship for a 30 month period from the date of retail purchase by end user.

Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.To obtain service under this warranty you must obtain a Returned Material

Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges

prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged

by accident, negligence or misapplication or has been altered or modified in any way, including opening of the unit’s casing for any reason. This warranty applies only to the original purchaser

who must have properly registered the product within 10 days of retail purchase.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE

USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment,

loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty to

Tripp Lite product. You'll be automatically

entered into a drawing for a chance to

win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited.

Some restrictions apply. See website for details.

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Batteri
Model:	UT2012UL
Type:	Indendørs batterioplader
Bredde:	215.9 mm
Dybde:	412.8 mm
Højde:	184.2 mm
Vægt:	18420 g
Produktfarve:	Grå
Batterispænding:	12 V
Pakkevægt:	20960 g
Pakkedybde:	497.8 mm
Pakkebredde:	365.8 mm
Pakkehøjde:	325.1 mm
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Husmateriale:	Polykarbonat (PC)
Certificering:	UL 458 (USA), CSA
Udgangsspænding:	120 V
Kapacitet:	2000 W
Indgangsspænding:	120 V
Hovedkassen højde (udvendigt):	325.1 mm
Hovedkassens længde (udvendigt):	497.8 mm
Hovedkassens bruttovægt (udvendigt):	20960 g
Hovedkassens bredde (udvendigt):	365.8 mm
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	1 stk
Indgangsfrekvens:	60 Hz
Strømbeskyttelsesfunktioner:	Overheating, Overload
Kompatible batteri-teknologier:	Blybatterier (VRLA)
Udgang:	2 x NEMA 5-15R
Antal trin:	3