Tripp Lite PowerVerter Plus PV2400FC Manual

Tripp Lite Batteri PowerVerter Plus PV2400FC

Læs gratis den danske manual til Tripp Lite PowerVerter Plus PV2400FC (20 sider) i kategorien Batteri. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Tripp Lite PowerVerter Plus PV2400FC, eller vil du spørge andre brugere om produktet?

Side 1/20
1
Copyright © 2000 Tripp Lite. All rights reserved. PowerVerter
®
is a registered trademark of Tripp Lite.
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Owner's Manual
PowerVerter Plus
®
120V, 60 Hz Output
DC-to-AC Power Inverters
Voltage- and Frequency-Controlled
High Peak Power, High Efficiency
Español: p. 9
Installation: p. 3 - 5
Service & Warranty: p. 8
Safety: p. 2
Operation & Features: p. 6 - 7
Specifications: p. 8
Diagrams: p. 17 - 20
Your PowerVerter Plus converts DC power from connected batteries into AC power for
connected equipment. It can provide up to twice its continuous output rating for short periods,
enabling it to run electrical devices such as motors that have a high power demand at startup.
Read this manual carefully to learn how to connect, operate and maintain your PowerVerter Plus.
200002001 CURRENT PV 500-2400FC.p65 4/12/00, 1:44 PM1
2
Safety
This manual contains important instructions and warnings that should be followed during the
installation, operation and storage of all Tripp Lite PowerVerter Systems.
PowerVerter Location Warnings
Install your PowerVerter indoors, away from excess moisture or heat, dust or direct
sunlight.
Do not attempt to mount your PowerVerter on a vertical surface.
Leave adequate space around all sides of the PowerVerter for proper ventilation. The
more power connected equipment draws, the more heat will be generated by the
PowerVerter.
Do not install the PowerVerter near magnetic data storage media, as this may result in
data corruption.
Battery Connection Warnings
Your PowerVerter will not operate until batteries are connected.
Multiple battery systems must be made up of batteries of the same voltage, age, amp
hour capacity and type.
Keep battery location well ventilated. Explosive hydrogen gas can accumulate near
batteries if they are not kept well ventilated.
Sparks may result during final battery connection. Always observe proper polarity as
batteries are connected.
Tighten your battery terminals to create an efficient battery connection and prevent
excessive heating.
Do not allow objects to contact the two DC input terminals. Do not short or bridge these
terminals together. Serious injury to property or person could result.
Equipment Connection Warnings
Do not use Tripp Lite PowerVerter Systems in life support applications where a
malfunction or failure of a Tripp Lite PowerVerter System could cause failure or
significantly alter the performance of a life support device.
Do not connect a surge suppressor, line conditioner or UPS to the output of the
PowerVerter.
Operation Warnings
Your PowerVerter does not require routine maintenance. Do not open your PowerVerter
for any reason. There are no user-serviceable parts inside.
Potentially lethal voltages exist within this unit as long as the batteries are connected.
During any service work, the batteries should therefore be disconnected.
Do not connect or disconnect batteries while the PowerVerter is operating. Dangerous
arcing may result.
200002001 CURRENT PV 500-2400FC.p65 4/12/00, 1:44 PM2


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Batteri
Model: PowerVerter Plus PV2400FC

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite PowerVerter Plus PV2400FC stil et spørgsmål nedenfor, og andre brugere vil svare dig