Truetone 1 Spot Pro CS7 Manual

Truetone Ikke kategoriseret 1 Spot Pro CS7

Læs gratis den danske manual til Truetone 1 Spot Pro CS7 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Truetone 1 Spot Pro CS7, eller vil du spørge andre brugere om produktet?

Side 1/4
www.Truetone.com
IMPORTANT SAFETY INSTRUCTIONS
1. All the safety and operating instructions should be read before this
product is operated. Keep these instructions for future reference.
2. Pay attention to all warnings on the power supply and in the operating
instructions.
3. WARNING: Do not use this device near water or any other liquid.
4. Clean only with dry cloth.
5. Do not block any ventilation openings.
6. Do not use this device near any heat sources.
7. Do not remove the power plug grounding pin on the input cable.
8. Protect all input and output power cables from being walked on or
pinched.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the brackets and screws provided with this power
supply.
11. Unplug this device during lightning storms or when unused for long
periods of time.
12. Refer all repairs to qualified personnel at Truetone or an authorized
Truetone distributor. Under no circumstances should the power
supply be opened by the user.
13. This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
- WARNING: To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the
appliance.
14. The maximum ambient temperature should not exceed 35 degree C.
15. Date code: YYMM, YY means year, MM means month. For example:
1412 represents Year 2014, December.
Owners Manual
Need some great pedals to go
with your 1 SPOT Pro?
Check out Truetone
*
pedals at
Truetone.com
* Truetone was formerly known as Visual Sound; the makers
of Jekyll & Hyde, Route 66, H2O, Visual Volume and
The 1 SPOT!
Mounting your 1 SPOT Pro under a Pedaltrain
®
pedalboard:
The 1 SPOT Pro comes with 2 metal brackets, 4 black machine screws and 4
silver thread-forming screws. The black machine screws are for attaching the
metal brackets to the sides of the 1 SPOT Pro, and the thread-forming screws
are for attaching the brackets to the Pedaltrain
®
, as shown below. There is no
need to pre-drill holes for the screws if you are using a powered screwdriver.
Make sure the 1 SPOT Pro is
slanted during mounting, so that
the IEC input socket is in between the
rails of the Pedaltrain. To help position it
correctly, you can put a 9V battery under the
1 SPOT Pro (center-back of the unit), which
will raise the back to the proper height the
battery is only acting as a temporary spacer.
After the 4 thread-forming screws are installed, push the 9V battery out.


Produkt Specifikationer

Mærke: Truetone
Kategori: Ikke kategoriseret
Model: 1 Spot Pro CS7

Har du brug for hjælp?

Hvis du har brug for hjælp til Truetone 1 Spot Pro CS7 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Truetone Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer