Ubiquiti Networks UniFi Protect Manual


Læs gratis den danske manual til Ubiquiti Networks UniFi Protect (29 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Ubiquiti Networks UniFi Protect, eller vil du spørge andre brugere om produktet?

Side 1/29
1080p Indoor/Outdoor IP Camera with
Infrared and 802.3af Support
Model: UVC-G3-FLEX
Introduction
Thank you for purchasing the Ubiquiti Networks® G3 Flex
camera. This Quick Start Guide is designed to guide you
through installation and includes warranty terms.
Package Contents
G3 Flex Camera Flush Mount Pole/Wall
Mount
Outdoor
Cover
Security Screw
(Qty. 1)
Screws
(Qty. 3)
Screw Anchors
(Qty. 3)
Zip Ties
(Qty. 2)
Installation Requirements
Phillips screwdriver
Drill and 6 mm (1/4") bit for drywall anchors and 3 mm (1/8")
for screws)
Category 5e (or above) Ethernet cable
Note:
When using the Outdoor Cover, use an Ethernetcable
without a strain-relief boot on the connector. This willprevent
unnecessary tension on the cable ends during installation.
Cable without a strain-relief boot Cable with a strain-relief boot
TERMS OF USE: All Ethernet cabling runs must use CAT5e (or above). Shielded Ethernet
cable and earth grounding must be used for outdoor installations as conditions of product
warranty. TOUGHCable
is designed for outdoor installations. It is the professional installer’s
responsibility to follow local country regulations.


Produkt Specifikationer

Mærke: Ubiquiti Networks
Kategori: Overvågningskamera
Model: UniFi Protect

Har du brug for hjælp?

Hvis du har brug for hjælp til Ubiquiti Networks UniFi Protect stil et spørgsmål nedenfor, og andre brugere vil svare dig