
1.  Please make sure to turn o the power before starting the installation.
2.  Installation must be performed by a qualified electrician.
3.  The light source of this luminaire is not replaceable; when the light source 
reaches its end of life the whole luminaire shall be replaced.
4.  The external flexible cable or cord of this luminaire cannot be replaced; if 
the cord is damaged, the luminaire shall be destroyed.
5.  Proper grounding should be ensured throughout the installation.
6.  Terminal block not included.
7.  To be connected with waterproof cable hose.
8.  Replace any cracked protective shield.
9.  Minimum distance from lighted objects 1m.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. 
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully 
before starting the installation and keep this manual handy for future reference. If you have any another query, please contact 
our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. 
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect 
installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect 
removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 
Hours a day would void the warranty. This product is warranted for manufacturing defects only.
MODEL VT-91100CCT VT-91150CCT
INPUT VOLTAGE AC: 220-240V, 50/60hz
ON/OFF CYCLE 15,000 Times
N.W (KGS) 0.56KGS/PC KGS/PC0.79
DIMENSION Ø235x235x32mm Ø277x277x32mm