V-TAC VT-3610 Manual

V-TAC lampe VT-3610

Læs gratis den danske manual til V-TAC VT-3610 (2 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om V-TAC VT-3610, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

WEEE Number: 80133970

INTRODUCTION & WARRANTY

Thank you for selecting and buying MAGNETIC SMART TRACKLIGHT V-TAC will serve you

the best. Please read these instructions carefully before starting the installation and keep

this manual handy for future reference. If you have any other query, please contact our

dealer or local vendor from whom you have purchased the product. They are trained and

ready to serve you at the best. The warranty is valid for 3 years from the date of purchase.

The warranty does not apply to damage caused by incorrect installation or abnormal wear

and tear. The company gives no warranty against damage to any surface due to incorrect

removal and installation of the product. The products are suitable for 10-12 Hours Daily

operation. Usage of product for 24 Hours a day would void the warranty. This product is

warranted for manufacturing defects only.

SMART MAGNETIC LINEAR SPOT

LIGHT - ADJUSTABLE ANGLE

TECHNICAL DATA

Model

SKU

Input voltage

Lumens

Power

Beam Angle:

CRI

Body type

VT-3610

6886

DC:48V

900LM

10W

30’D

>90

Aluminum

works with

Assistant

APP INSTALLATION

Step 2: Scan the given QR code, or

download “V-TAC Smart Light’ from

the App Store (iOS) or the Google Play

Store (Android).

1. Switch o the power.

2. Install the luminaire into the guide rail groove .

3. Check that everything is in order.

4. Switch on the power if above steps done properly without any mistakes.

WARNING

1. Please make sure to turn o the power before starting the installation.

2. Installation must be performed by a certiﬁed person.

3. Proper grounding should be ensured throughout the installation.

4. For Indoor use only

Caution, risk of electric shock.

This marking indicates that this

product should not be disposed

of with other household wastes.

For ANDROID

For IOS

INSTALLATION INSTRUCTION

1 2

3 4

Step 7: Choose ‘Lighting’ to start

pairing the light to the app.

Step 8: To pair the device with LED Smart Strip Light make sure the light is blinks

rapidly.

Once the light blinks rapidly, the light is in pairing mode. If the light is not blinking rapidly,

you can do one of the following steps:

A. Switch the light on & o repeatedly for 3 times, with short intervals of less than 2

seconds.

B. Tap the ‘How to make light blink rapidly’ link (as shown on the image to the right)

C. You can also enable pairing mode from the Wi-Fi controller. Press and hold the

ON/OFF button for 5-7 seconds and wait till you observe the light ﬂashing. Please refer

to the instruction section "WI-FI CONTROLLER FUNCTIONS"

Network Modes:

1) Smart Mode: Light ﬂashes rapidly.

2) AP mode: Slow ﬂash, once every 2 seconds.

Conﬁrm if the light blinks rapidly, select the Wi-Fi network, and enter the password.

Step 9: Once you have successfully completed

step 8, you will be redirected to below page,

where the App searches, registers and initializes

the device(lamp) (ref image below)

Step 10: Once your device is successfully

added, rename the device to your

preference.

Step 11: Aer successfully pairing the Wi-Fi receiver with the app, you can start

controlling multiple features of the lamp through your mobile– on/o switch, timing &

schedules, and more.

Step 3: Open the V-TAC Smart Light app and

tap on register for creating a new account.

Step 4:

A) Mobile Number: Select the country, then enter

your mobile number. Once done, tap ‘Next’.

B) E-Mail: Enter your email id and tap on ‘Next’.

Step 5: Enter the veriﬁcation code

which

will be sent to your mobile

number/email id, then assign a new

password to your account and tap on

“Conﬁrm”.

Step 6: Tap on ‘Add Device’ or the + sign.

Make sure the lamp is switched on.

Step1:Install the Amazon Alexa app via the

App Store(iOS) or the Play Store (Android)

and register. If you already have an existing

account with Amazon Alexa, please proceed

to logging in.

Step3: Tap on settings and tap on

“skills and games” as shown below.

Step4: Search for ‘V-TAC Smart Light’ on the

“Skills & Games” page as shown below.

Step2: Once you are on the Amazon Alexa home

page, tap on the lower right icon –– where the

arrow is pointed–– to add a new device and skill.

ALEXA SETTINGS

Step5: Enable the Skill.

Step6: Enter your V-TAC Smart Light login

ID and password and tap on “Link Now”

Step7: Once you tap on Link Now, you will be

redirected to a new page requesting for

authorization(Ref Image below).

Tap on “Authorize”

Step8: You will receive conﬁrmation of the

account being linked successfully

(Ref Image below)

Now, you can control your smart device using voice commands on Alexa. Below are a

few commands you can use:

Note: Discovering the device must be done every time the device’s name is changed on

the app.

!Al a urn /o bedr m ght.ex , t on  oo li

!Al a bedr m o per nt.ex , t se oo li t tgh 50 ce

2. Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)

4. Stable Wiﬁ network

1. V-TAC Smart Light App & Amazon Alexa App

3. Smart Device - Lamp

ALEXA Commands

THINGS TO REMEMBER BEFORE STARTING INSTALLATION:

Step9: Discover your smart device on Alexa. Once you have enabled the skill

A) You can use voice command ”Alexa discover devices” to the Alexa device which you have.

B) To add device manually on home page tap on and tap on Add device , select the device

which you are adding and tap on discover device.

5/12 6/12 7/12 8/12

1/12 2/12 3/12 4/12

MULTI-LANGUAGE MANUAL QR CODE

Please scan the QR code to access the manual in

multiple languages.

INSTRUCTION MANUAL

Step2: Once you are on the Google home page, tap on the Add “+” icon– to add a new device and

skill. And then tap on Set up device as shown in below image.

GOOGLE HOME SETTINGS

Step1:

a&b) Install the Google Home app via the App Store (iOS) or the Play Store (Android) and register.

If you already have an existing account with Google Home, please proceed to logging in.

c) Create a New Home/Choose from the existing home if any.

d) Power ON the Google Home device and connect it to the App.(Then Proceed to step 2)

Step3: Make sure the Smart Bulb is paired

with V-TAC Smart Light app before starting

step 3. Tap on the arrow section as highlighted

in the below image.

Step5: Sign In with your V-TAC Smart Light

Step6: Tap on Authorize in order to

proceed to linking the device.

Step4: Type “V-TAC Smart Light” on the search

bar and tap on the icon of “V-TAC Smart Light”

Step7

a. Account will now be linked, please stay on the page you will be redirected in few seconds to

select the device to add to your home.

b. Select the device and tap on Next as show in image b.

Step8: Select the Home where you would like to

add the Smart Light under. (Or) you can create a

New home in order to add the Smart Light to it.

Step9: You have succesfully added Smart Light

device to your Google home App.

Account is now Linked

Now, you can control your smart device using voice commands on Google Home. Below are a few

commands you can use:

!OK Google, turn /o bedr m ghtt.on  oo li

!OK Google, t se bedr m o per nt.oo li t tgh 50 ce

2. Make sure you have Google Home Device

4. Stable Wiﬁ network

1. V-TAC Smart Light App & Google Home App

3. Smart Device - Lamp

Google Commands:

THINGS TO REMEMBER BEFORE STARTING INSTALLATION:

Step10:

a. You can turn the Lamp On/OFF by taping on On/O options as shown below. (OR) You can tap

on the Smart Lamp.

b. You will be redirected to page(as shown in image b) where you can control the lights “Power

and Dimmingfunctionality”.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU

FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST

DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

9/12 10/12 12/1211/12

Produkt Specifikationer

Mærke:	V-TAC
Kategori:	lampe
Model:	VT-3610

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-3610 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

lampe V-TAC Manualer

V-TAC VT-23181 Manual

4 Marts 2025

V-TAC VT-42112-S Manual

4 Marts 2025

V-TAC VT-3612 Manual

8 Januar 2025

V-TAC VT-91100 Manual

7 Januar 2025

V-TAC VT-3620 Manual

7 Januar 2025

V-TAC VT-3614 Manual

7 Januar 2025

V-TAC VT-91150 Manual

7 Januar 2025

V-TAC VT-3610 Manual

7 Januar 2025

V-TAC VT-90201 Manual

5 September 2024

V-TAC VT-92100 Manual

5 September 2024

lampe Manualer

Nyeste lampe Manualer

NUVO Arabel 60/6967 Manual

4 April 2025

NUVO Gotham 60/191 Manual

4 April 2025

NUVO Cordello 60/7884 Manual

4 April 2025

NUVO Clarksville 60/8061 Manual

4 April 2025

NUVO Gotham 60/190 Manual

4 April 2025

Integral LED ILSTRGBWB028E Manual

4 April 2025

Trust Shyne 25483 Manual

3 April 2025

Trust Vybz GXT 904 Manual

3 April 2025

Schonbek Priscilla BC7106N-48PBZ Manual

2 April 2025

Bresser BR-7RGB Mini Tube Manual

2 April 2025