Vacmaster VP321 Manual

Vacmaster Vakuum pakkemaskine VP321

Læs gratis den danske manual til Vacmaster VP321 (2 sider) i kategorien Vakuum pakkemaskine. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Vacmaster VP321, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operator’s Guide

VP321 Chamber Machine

Commercial Vacuum Packaging System

4. Fill pouch and place in Chamber

◦ Remove or replace ller plate to accommodate the product to be vacuumed.

◦ Always use as many ller plates as possible. Lay the pouch at in the

chamber with the opening of the pouch across the seal bar.

◦ Pouch opening should extend across the seal bar by ½” to 1”. Make sure

the opening is at and wrinkle-free.

Note: the entire pouch must remain inside the chamber.

5. Close lid

Hold down rmly until vacuum engages.

6. Process

Closing the lid begins the vacuum cycle.

7. Remove pouch & inspect

Vacuum – check the quality of the vacuum by looking at the tightness of the

pouch and the product. If you notice “air pockets” increase the vacuum time

by a few seconds, test again. This may take up to 60 seconds depending on

pouch size and the volume of product being packaged.

Seal – Inspect the pouch seal.

Note: A positive seal will look “clear” upon inspection. If the seal is “spotty

or incomplete” increase the sealing time by 0.2 seconds.

If the seal is “white or milky” decrease seal time by 0.2 seconds.

Additional Controls:

Vacuum Gauge

Represents the vacuum level inside the chamber.

STOP Button

Stops the vacuum cycle and the pouch will be sealed immediately.

This feature can be used to eliminate or minimize product from escaping

the pouch during the vacuum cycle. It can also be used to control the

vacuum level when packaging softer, fragile items.

Seal Bar Temperature Setting

Allows quick adjustments to the sealing temperature.

Adjust the temperature upon pouch seal inspection.

Vacuum Cycle

(counts down to zero)

Sealing Cycle

(counts down to zero)

Cooling Cycle

(counts down to zero)

Vacuum Devac

(air is let back into the chamber)

Lid will open automatically when cycle

is complete.

*Keep face and body clear of opening lid.*

Produkt Specifikationer

Mærke:	Vacmaster
Kategori:	Vakuum pakkemaskine
Model:	VP321

Har du brug for hjælp?

Hvis du har brug for hjælp til Vacmaster VP321 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vakuum pakkemaskine Vacmaster Manualer

Vacmaster VP800 Manual

13 Juni 2025

Vacmaster VP600 Manual

13 Juni 2025

Vacmaster VP200 Manual

16 November 2024

Vacmaster VP95 Manual

16 November 2024

Vacmaster VP330 Manual

30 April 2024

Vacmaster VP321 Manual

11 April 2023

Vakuum pakkemaskine Manualer

Nyeste Vakuum pakkemaskine Manualer

FoodSaver V5860 Manual

17 Juni 2025

Gaggenau GV451720 Manual

17 Juni 2025

VacPak-It VSM12PR Manual

15 Juni 2025

Rommelsbacher VAC 585 Manual

15 Juni 2025

Weston 65-1001-W Manual

15 Juni 2025

Henkelman Aero 35 Manual

14 Juni 2025

Gourmia GVS455 Manual

13 Juni 2025

Vollrath VP12 Manual

13 Juni 2025

Henkelman Aero 42 XL Manual

13 Juni 2025

Vollrath 40858 Manual

12 Juni 2025