Valeton Dapper Bass Mini Manual

Valeton Ikke kategoriseret Dapper Bass Mini

Læs gratis den danske manual til Valeton Dapper Bass Mini (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Valeton Dapper Bass Mini, eller vil du spørge andre brugere om produktet?

Side 1/2
OWNER’S MANUAL
Dapper Bass Mini is a seriously potent effects strip with
all the essentials for bass players. Please read this user
manual carefully before starting to use for a complete
introduction to the features.
CONNECTIONS
Getting started with Dapper Bass Mini is easy! Plug your
cable into the INPUT jack and run another cable from the
OUTPUT (or XLR) jack to your amp/mixer/audio interface.
Here's how to use the I/O panel:
TUNER
First in line is a stealth, fast and accurate tuner so you can play confidently in tune. Press and hold the CHORUS
module ON/OFF switch to enable the TUNER. When this module is activated. Dapper Bass Mini will be MUTED.
SIGNAL PATH
CHORUS BASS AMP BOOST COMP
HOLD FOOTSWITCHCHORUS
TUNER (MUTE TUNING)
XLR OUT
PHONES OUTPUT AUX
INPUT
BOOST COMP is a booster and compressor combo. Set-to-forget
knobs make it simply diabolical. The compressor gets that warm opto
comp flavor with organic sustain and bouncy attack, and the booster
offers you up to +12dB of gain with some extra highs and digging-in
lows.
Controls:
COMP: Controls the compression amount.
BOOST: Controls the boost amount.
BOOST COMP
BASS AMP
This BASS AMP module will give your bass the life it needs for every
musical genre. The EQ is golden with cleans and highly responsive
even with the gain up.
Controls:
VOL: Controls the output volume.
BASS/MID/TREBLE: Controls the low/mid/high EQ parameters.
GAIN: Controls the amount of gain.
CHORUS
Plunge into the lush CHORUS module to take your sound to a brave
new world. Fine tune the onboard rate and depth knobs to beef up
your tone.
Controls:
DEPTH: Controls the chorus depth.
RATE: Controls the chorus speed.
These seven bi-color LEDs indicate the
current note name. The natural notes are
shown in blue, and the sharp notes are
shown in green.
Pitch flat
(Red)
Pitch sharp
(Red)
In tune
(Green)
AUX, PHONES and XLR
AUX jack for connecting phone or MP3 player. Plug your
headphones into the PHONES jack for practicing and jamming.
The PHONES knob only adjusts the headphones volume.
Note: This LED light up only when tuning.
Use the XLR OUT jack to feed a balanced signal to your audio
interface (for recording) or to a mixer (when you go straight to
the house).
Note: This unit CANNOT be powered by phantom power.
Make sure to turn off the phantom power on your mixer/interface
when connecting.
SPECIFICATIONS
Power requirement: 9V DC center negative
Current Consumption: 120mA
Dimansions: 197mm (D) × 65mm (W) × 42mm (H)
Weight: 446g
These three LEDs indicate the pitch accuracy.


Produkt Specifikationer

Mærke: Valeton
Kategori: Ikke kategoriseret
Model: Dapper Bass Mini

Har du brug for hjælp?

Hvis du har brug for hjælp til Valeton Dapper Bass Mini stil et spørgsmål nedenfor, og andre brugere vil svare dig