Vantage Point BKSP Manual

Vantage Point Ikke kategoriseret BKSP

Læs gratis den danske manual til Vantage Point BKSP (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Vantage Point BKSP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

IMPORTANT CONSIDERATIONS PRIOR TO INSTALLATION

Preview all steps before beginning. Should any portion of these instructions be unclear, contact us at for assistance. to 800-582-9595 Do Not Attempt

install this speaker mount if you have any doubts as to its proper installation. This speaker mount is specifically designed for mounting speakers weighing

25 lbs. or less. Use of this speaker mount for any other purpose unless specified by the manufacturer is not recommended.

Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA

USA Tel: 1.800.582.9595 • Canada Tel: 905.607.9994 • Europe Tel: 31.72.581.6056

Web Site: www.vanptc.com • Email: cons-serv@vanptc.com

Maximum Speaker Weight: 25 lbs

WARRANTY INFORMATION

All Vantage Point Products Corp. products are manufactured to ensure superior quality, performance and durability for a lifetime of use . Warranty covers the

product to be free of defects in materials and workmanship under normal and reasonable use. Vantage Point Products will repair or replace, at our option,

any product which proves to be defective upon our inspection. This warranty will not apply to products that have been lost or damaged by misuse, abuse or

accident, altered or repaired in any way or by any person or ﬁrm other than speciﬁed by us, used in violation of instructions or incorrect assembly nor used in

a manner other than speciﬁed by us. This warranty is nontransferable to a new owner and may require proof of purchase. All claims must be directly handled

with Vantage Point Products Corp. by calling us at 1-800-582-9595.

Model BKSP Bookshelf Speaker

Mount Assembly Instructions

rev-09/05

Supplied is mounting hardware for 3 different surface applications. You will need to determine what style

hardware will work best with your mounting surface. NOTE: Always use CAUTION when drilling into a

wall or ceiling. Make sure you are avoiding all electrical and water lines. Not all installation applications will

support themaximum rated weight of this product. The installer is responsible for evaluating the integrity

of materials and structure prior to mounting speaker.

F (pressed in at factory)

Assembled at Factory

A Wall Plate / Speaker Plate 4

B Link 2

C Link Cap 4

D Plastic Cover 4

E 5/16”-18 x 3/4” button head link screw 2

F 5/16”-18 serrated binder nut (with id. mark) 2

G 1/4”-20 x 1” socket head cap screw 8

Bagged Hardware Kit

H #14 x 2” self tapping screw 4

I #14 x 1” self tapping screw 4

J 1/4”-20 x 3/4” machine screw 4

K Toggler® Alligator anchors 4

L 3/16” long style allen wrench 1

PARTS LIST

“TOGGLER is a registered trademark of

Merchandise Plastics Corp.” ALLIGATOR

ANCHOR® “Patented under US Patent numbers

4,181,061;4,752,170 and 5,161,296 and foreign

counter parts thereof. Other patents pending”

REQUIRED TOOLS

pressed in

at factory F

OPTION. SINGLE POST INSTALLATION A single post adapter is available for purchase. To purchase call 1-800-582-9595.

Speaker

Post

Step 3a. Optional Speaker Post Style Mounting

Step 3. Speaker Mounting

Step A. Remove all parts from packaging.

Disassemble the Link Assemblies (B) by removing Button Head Allen Screw (E) using the 3/16” Allen Tool (L) provided. The Serrated Binder

Nut (F) has been pressed in at the factory and should not be loosened or removed! Remove plastic covers (D). Loosen the Socket Head Cap

screws (G) slightly allowing Links (B) to rotate freely.

Step B. INSTALLING SPEAKER PLATE

(1/4-20 Threaded Holes in speakers)

Using the 1/4-20 x 3/4” machine screws (J) align the Speaker Plate (A) over the threaded holes, install the screws (J) and secure to speaker

cabinet.

Step C. INSTALLING SPEAKER PLATE (No Threaded Holes, Wood Cabinet)

Locate the optimum mounting position for the Speaker Plate (A). Using Speaker Plate (A) as a template, mark for drilling speaker cabinet. NOTE:

You do not want to drill or screw into the speaker where you could possibly damage internal components. Drill holes in Speaker cabinet using a

1/8” drill bit. These holes should be drilled no more than 3/4” deep. (You can accomplish this by placing a piece of tape 3/4” from the end of the

drill bit providing you with a guide.) Using the #14 x 1” Self Tapping screws (I) mount the Speaker Plate (A) to the Speaker Cabinet.

Supplied are parts and hardware for mounting to various manufacturers speakers. You will need to select the type that best suits your application. If the hardware

provided does not fit your speaker you will need to acquire the appropriate hardware. CAUTION: RECOMMENDED HARDWARE PROVIDED IS DESIGNED FOR

SPEAKER WEIGHTS INDICATED. INSTALLER MUST CONSIDER THE INTEGRITY AND DESIGN OF THE SPEAKER CABINET. SOME INSTALLATIONS MAY

REQUIRE THE INSTALLATION OF A THROUGH BOLT AND REINFORCEMENT BACKING IF SPEAKER CABINET DESIGN WILL NOT SUPPORT SPEAKER

WEIGHT.

drill (2)

1/8” dia.

x 1-7/8”

deep holes

16"

(TYPICAL)

locate wood

stud in ceiling

or wall

install mounting plate

using (2) #14 x 2”

screws into wood stud

SOLID WOOD OR WOOD STUD

Using a stud finder locate the wood stud or framing member. Using a pick or small drill bit locate the center

of the wood stud, be careful doing this as you don’t want to go any wider than the width of the Speaker

Wall Plate (A) (wall plate will cover any extra holes) Using the wall plate as a template mark hole position

on mounting surface (see fig. 1) NOTE: In wall mounting applications position mounting holes in a vertical

pattern. Drill holes through the drywall and into the wood stud using a 1/8” drill bit. These holes should be

drilled no less than 1-7/8” deep (see fig 2) You can accomplish this by placing a piece of tape a 1-7/8” from

the end of the drill bit providing you with a guide. After holes are drilled, mount the wall plate using the #14

x 2” self tapping screws (H).

Insert Toggler®

Alligator

Anchor® into concrete

Insert #14 x 2” screw

through wall plate into

Alligator Anchor®.

SOLID CONCRETE OR HOLLOW BLOCK

Using the Speaker wall plate (A) as a template mark hole position on mounting surface (see fig. 1)

NOTE: In wall mounting applications position mounting holes in a vertical pattern. (see fig.) Drill holes

in the solid concrete or hollow block using a 5/16” masonry drill bit. Once holes are drilled insert the

(4) #14 TOGGLER® ALLIGATOR ANCHORS® (K) into the holes making sure anchor is flush with

wall or ceiling surface (see fig. 2) With TOGGLER® ALLIGATOR ANCHORS® (K) in place, mount

the wall plate using the #14 x 2” self tapping screws (H). (see fig. 3)

Hammer insert into

into media until flush

with surface.

Step A. POSITIONING and MOUNTING SPEAKER MOUNT Leaving Plastic Covers (D) off. Re-assemble the Links (B) using the previously

removed 5/16”-18 x 3/4” button head link screw (E). Adjust Speaker assembly to desired positioning and tighten 5/16”-18 x 3/4” button head link screw

(E) using the 3/16” allen wrench (L). Next tighten the socket head cap screws (G) to hold the speaker in its final position. Before cover installation