Vantec NexStar TX Manual

Vantec Vugge & Dockingstation NexStar TX

Læs gratis den danske manual til Vantec NexStar TX (1 sider) i kategorien Vugge & Dockingstation. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Vantec NexStar TX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.

Printed in China

Printed on Recycled Paper.

v1.01 NST-D428S3-BK

www.vantecusa.com

Hard Drive Dock for Two 2.5”/3.5” SATA 6Gbps SSD/HDD

1. Verify the package contents. 2. Connect the power adapter to the NexStar TX

Hard Drive Dock.

3. Connct the USB 3.0 Cable to the NexStar TX

Hard Drive Dock and attache the other end to

the computer.

USB Cable

1. Safely remove the USB Hard Drive from the

computer’s operating system.

2. Once safe removal has been complated, turn OFF

the power on the NexStar TX Hard Drive Dock.

4. Insert 2.5” or 3.5” SATA Hard Drive into the slot.

3. The Hard Drive may now be ejected and removed.5. Turn ON the power, while the system detect the

Hard Drive, it’s ready to use.

How to REMOVE the Hard Drive

NOTE:

New hard drives needs to be initialized and partitioned

before it will appear in Windows Explorer or Mac desktop.

Produkt Specifikationer

Mærke:	Vantec
Kategori:	Vugge & Dockingstation
Model:	NexStar TX
Produktfarve:	Sort
Antal USB 2.0-porte:	1
Dimensioner (BxDxH):	130 x 73 x 14 mm
Materiale:	Aluminium
Kompatible operativsystemer:	Microsoft Windows 2000/XP/Vista/7, Mac OS 8.6
Grænseflade:	USB 2.0
Plug and play:	Ja
Størrelse på lagerdisk:	2.5 "
Antal understøttede lagerdiske:	1
Minimum processor:	Intel Pentium II 350 MHz / Mac G3
Understøttede dataoverførselshastigheder:	480 Mbps
Maksimal lagerkapacitet:	0.5 TB
Understøttede lagerdrev brugerflader:	Serial ATA II
Hot-swap:	Ja