
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
C0079
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
or circuit
box.
Mounting Plate (A)
Green Ground
Screw (C)
Fixture Mounting
Screw(E)
Ball Nut(G)
Mounting Screw (B)
Wire Connector (D)
Lock Nut (F)
Outlet Box
House Ground Wire
Fixture Ground
Wire
Wire Connector (D)
Fixture Mounting
Screw (E)
Fixture
Socket
Mounting Plate (A)
Green Ground
Screw (C)
Mounting Screw (B)
Pure Shell(H)
Pure Shell(H)
Lock nut (F)
Bolt nut(G)
1.Cut the “H” plastic buckles with scissor when take down
the PE bags. (See Fig.1)
2. Remove the mounting plate from fixture by unscrewing
two ball nuts.
3. Attach the mounting plate to the outlet box by using
two mounting screws.
4. Pull out the source wires from the outlet box. Make
wire connections using wire connectors as follows:
---Connect the hot wire (black insulation) from
the fixture to the black wire from the power source.
---Connect the neutral wire (white insulation) from
the fixture to the white wire from the power source.
---Attach the fixture ground wire (bare wire) to the
plate with the green ground screw. Then connect it
to the house ground wire with the wire connector.
Carefully put the wires back into the outlet box.
5. Attach the fixture to the mounting plate by inserting two
mounting screws into the holes, then tighten the fixture
by screwing the bolt nuts into the fixture mounting screw.
Bulb Type B Max.60W
(not included)
Installation Steps
Pure Shell
PE Bag
Scissor
“H”Plastic Buckle
Fig.
1
Page 1 / 2
240628