Wind River KG250 Manual

Wind River Ikke kategoriseret KG250

Læs gratis den danske manual til Wind River KG250 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Wind River KG250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MODEL:KG250

CAUTION: Before starting installation, disconnect the power by turning off the circuit breaker or removing the

fuse at fuse box.

Step 1: Remove the screws and the rubber washer from the switch box to allow easy wiring. (Fig.1)

Step 2: Remove and discard the center plug from the switch box plate. Attach the light kit to the switch box

plate by feeding the wires and threading the light kit the through the hole of the switch box plate, secure it to the

switch box plate using the nut and lock washer. Be sure it is tight enough to prevent the light kit from vibrating

loose. (Fig.1)

Step 3: Make the wire connections as follows and secure with the wire nuts provided:

- Connect white wire from the fan to white wire from the light kit.

- Connect blue wire from the fan to black wire from the light kit.

Setp 4: While holding the switch box plate, slide the switch box plate up against the switch box and align the

screw holes. Secure the switch box plate to the switch box using the screws and rubber washer removed

earlier. (Fig.2)

CAUTION: Make sure that the wires are not pinched between the switch cup and the switch cup plate.

Setp 5: Install 2 x 13W E27 CFL (Included). DO NOT EXCEED MAXIMUM WATTAGE RATING.

Setp 6: Remove the rubber washer, metal washer, metal nut, metal cap and finial from the light kit. Place glass

shade over the light kit stem, secure with the rubber washer, metal washer, metal nut, metal cap and finial. Do

not overtighten. (Fig.3)

Read and save these instructions

Screw

Rubber washer

Metal washer

Metal nut

Rubber washer

Switch box plate

Switch box

Lock washer

Metal nut

Metal cup

Glass shade

13W E27 CFL

Finial

Light kit

Center plug

Light kit

FIG. 1 FIG. 2 FIG. 3

Black wire

Blue wire

White wire

Wire nut

Produkt Specifikationer

Mærke:	Wind River
Kategori:	Ikke kategoriseret
Model:	KG250

Har du brug for hjælp?

Hvis du har brug for hjælp til Wind River KG250 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Wind River Manualer

Wind River KG250 Manual

17 December 2025

Wind River KG200 Manual

17 December 2025

Wind River KG100 Manual

17 December 2025

Wind River HR3500 Manual

17 December 2025

Wind River KG400 Manual

16 December 2025

Wind River WR4500 Manual

16 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vaxcel T0450 Manual

17 December 2025

Akasa Newton A-NUC13-M1B Manual

17 December 2025

Gamdias Aura GC9M ARGB Manual

17 December 2025

Wine-Mate WM-6500SSDWC Manual

17 December 2025

ORNO OR-CR-297 Manual

17 December 2025

Sanus VF2022 Manual

17 December 2025

Wine-Mate WM-2500SSW Manual

17 December 2025

Wine-Mate WM-6500SSR Manual

17 December 2025

Vinotemp BR-MW OH16-S Manual

17 December 2025

Vinotemp BR-RETRO-01-W Manual

17 December 2025