Vaxcel Huntley W0453 Manual

Vaxcel Lys Huntley W0453

Læs gratis den danske manual til Vaxcel Huntley W0453 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vaxcel Huntley W0453, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

W0170 / W0171 / W0190 / W0307 / W0453

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Page 1 / 2

Hardware Package (included):

Mounting Screw (B) Wire Connector (C) Bolt Nut (D)Mounting Plate Unit (A)

Finial (F)

Set Screw (E)

Glass Shade

Bolt Nut (D)

Socket

Set Screw (E)

Glass Holder

Finial (F)

Tube

Max. 60W Medium

Base bulb

(not included)

House Ground Wire

Outlet Box

Mounting Screw (B)

Green Ground Screw

Fixture Mounting Screw

Mounting Plate Unit (A)

Fixture Wire

Backplate

Fixture Ground Wire

Wire Connector (C)

1. Unscrew two bolt nuts (D), and then remove the mounting plate unit (A) from the backplate.

2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the

preinstalled fixture mounting screws if necessary.

Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level.

3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follow:

---Connect the hot wire (black insulation) from the fixture to the black wire from the power source.

---Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.

---Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with the green ground screw, and

then connect it to the house ground wire with the wire connector (C).

Carefully put the wires back into the outlet box.

4. Attach the backplate to the mounting plate unit (A) by inserting two fixture mounting screws, and then secure it

with two bolt nuts (D).

Turn off the power at fuse or circuit box.

Installation Steps

231116

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Lys
Model:	Huntley W0453

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Huntley W0453 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Vaxcel Manualer

Vaxcel Galena W0401 Manual

18 December 2025

Vaxcel Huntley W0453 Manual

18 December 2025

Vaxcel Toledo W0349 Manual

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

Lys Manualer

Nyeste Lys Manualer

NightStick TAC-460XL-K01 Manual

18 December 2025

NightStick Remington SFL-13GL Manual

18 December 2025

V-TAC VT-7748 Manual

17 December 2025

NightStick TWM-850XL Manual

17 December 2025

NightStick Mossberg SFL-11WL Manual

17 December 2025

NightStick TWM-350S Manual

17 December 2025

NightStick Mossberg SFL-12WL Manual

17 December 2025

NightStick XPP-5570GA Manual

17 December 2025

NightStick NSR-9912LB Manual

17 December 2025

NightStick TSM-15G Manual

17 December 2025