Vaxcel OW37293 Manual

Vaxcel Ikke kategoriseret OW37293

Læs gratis den danske manual til Vaxcel OW37293 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vaxcel OW37293, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

1. Unscrew the set screws and bolt nuts to separate the frame from the fixture.

2. Thread two screws through the cross bar, then secure them with two lock nuts. Adjust the

length of the screw if necessary.

3. Attach the cross bar to the outlet box by using two mounting screws.

4. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire

connections using the wire nuts:

---The black wires from the light to the black wire from the power source.

---The white wires from the light to the white wire from the power source.

---Attach the fixture grounding wire to the cross bar with the green grounding screw.

Then connect it to the house grounding wire with a wire nut.

Carefully put the wires back into the outlet box.

5. Attach the fixture to the cross bar by inserting the screws, then secure it with two ball nuts.

6. Gently pull the clips upright to place the flat glasses into the frame, and then press them

back to secure the flat glasses. (See Fig.1 & Fig.2)

Note: The flat glass should be fastened into position as shown in Fig.3.

7. Install a bulb (not included). See relamping label at socket area or packaging for maximum

allowed wattage.

8. Restore the frame back to the fixture.

9. Turn on the power at the main fuse or circuit breaker box.

Mounting Screw

Fixture Wire

Back Plate

Set Screw

Socket

Bolt Nut

Frame

Fixture

Ball Nut

Lock Nut

Cross Bar

House Grounding Wire

Green Grounding Screw

Fixture Grounding Wire

Wire Nut

Screw

Outlet Box

070918

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTION.

OW37273 / OW37293 / OW14673 / OW14693

Clip

Flat Glass

Clip

Frame

Pull the clip upright

Frame

Flat Glass

Clip

Fig.2 Fig.3Fig.1

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Ikke kategoriseret
Model:	OW37293

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel OW37293 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vaxcel Manualer

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

18 December 2025

Vaxcel OF33412 Manual

18 December 2025

Vaxcel T0371 Manual

18 December 2025

Vaxcel OW37293 Manual

18 December 2025

Vaxcel T0607 Manual

18 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aqprox appLS05HD2D Manual

18 December 2025

Silverstone EBA02 Manual

18 December 2025

Aqprox appLS02AS Manual

18 December 2025

Hilti NCV 4-22 Manual

18 December 2025

Akasa Newton A-NUC96-M1B Manual

18 December 2025

Silverstone FPS01 Manual

18 December 2025

Gamdias Aura GC6 Elite Manual

18 December 2025

Akasa Newton A-NUC30-M1B Manual

18 December 2025

Grundig TORONTO 40 GEF 6965 B Manual

18 December 2025

Akasa Pascal A-NUC46-M1B Manual

18 December 2025