Vaxcel T0769 Manual

Vaxcel Ikke kategoriseret T0769

Læs gratis den danske manual til Vaxcel T0769 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vaxcel T0769, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0769

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read

and save these instructions.

Hardware Package (included):

Mounting Screw (B) Wire Connector (C) Bolt Nut (D)

Rubber Pad (E)

Crossbar Unit (A)

Page 1 / 2

Turn off the power at fuse or circuit box.

Installation Steps

1. Unscrew the two bolt nuts (D), remove the two rubber pads (E) and the crossbar unit (A) from the backplate.

2. Attach the crossbar unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the

preinstalled fixture mounting screws if necessary.

Note: Make sure that the fixture mounting screws are lined up horizontally to make the fixture level.

3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:

• Connect the hot wire (black insulation) from the fixture to the black wire from the power source.

• Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.

• Attach the fixture ground wire (bare wire) to the crossbar unit (A) with the green ground screw, then

depending on local code, connect it to the house ground wire with the wire connector (C).

Carefully put all of the wires back into the outlet box.

Wire Connector (C)

House Ground Wire

Outlet Box

Mounting Screw (B)

Fixture Mounting Screw

Green Ground Screw

Crossbar Unit (A)

Fixture Wire

Backplate

Fixture Ground Wire

Rubber Pad (E)

Bolt Nut (D)

240719

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Ikke kategoriseret
Model:	T0769

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel T0769 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vaxcel Manualer

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Wind River KG250 Manual

17 December 2025

Akasa Newton A-NUC13-M1B Manual

17 December 2025

Gamdias Aura GC9M ARGB Manual

17 December 2025

Wine-Mate WM-6500SSDWC Manual

17 December 2025

ORNO OR-CR-297 Manual

17 December 2025

Sanus VF2022 Manual

17 December 2025

Wine-Mate WM-2500SSW Manual

17 December 2025

Wine-Mate WM-6500SSR Manual

17 December 2025

Vinotemp BR-MW OH16-S Manual

17 December 2025

Vinotemp BR-RETRO-01-W Manual

17 December 2025