Vaxcel Tucson T0680 Manual

Vaxcel Ikke kategoriseret Tucson T0680

Læs gratis den danske manual til Vaxcel Tucson T0680 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel Tucson T0680, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0679 / T0680
T
W
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ
AND SAVE THESE INSTRUCTIONS.
3. When handling the fixture, do not apply pressure to the LEDs.
Hardware Package (included):
Mounting Screw (B) Wire Connector (C) Bolt Nut (D) Rubber Pad (E)Crossbar Unit (A)
Page 1 / 2
Turn off the power at fuse or circuit box
Installation Steps
1. Unscrew the two bolt nuts (D). Remove the two rubber pads (E) and the crossbar unit (A) from the backplate.
2. Attach the crossbar unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled
fixture mounting screws if necessary.
Note: Make sure that the fixture mounting screws are lined up horizontally to make the fixture level.
221101
Wire Connector (C)
House Ground Wire
Outlet Box
Mounting Screw (B)
Fixture Mounting Screw
Green Ground Screw
Crossbar Unit (A)
Fixture Wire
Rubber Pad (E)
Bolt Nut (D)
Backplate
Fixture Ground Wire
Integrated LED Included


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Ikke kategoriseret
Model: Tucson T0680

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Tucson T0680 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vaxcel Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer