Vello CB-200 Manual

Vello Ikke kategoriseret CB-200

Læs gratis den danske manual til Vello CB-200 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Vello CB-200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Thank you for choosing the Vello Speedy Bracket.

The Speedy Bracket puts you in control of your lighting whether

you’re shooting horizontally or vertically, and allows you to switch

between the two orientations with just a quick ﬂip of the camera.

Please follow the instructions below to get the most o

CAMERA ROTATING FLASH BRACKET

SPEEDY BRACKET

Removable

Accessory Shoe

Five-Year Limited Warranty

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of ﬁve (5) years from the original

purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or

replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or

part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and

function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE

WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILIT Y OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with speciﬁc legal rights, and you may also have additional rights that vary from state to

state.

To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Vello

along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit w ww.vellogear.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

www.vellogear.com

PREPARING YOUR SPEEDY

BRACKET FOR MOUNTING

Before mounting your camera for the

ﬁrst time, you will need to attach the

adhesive cork pad included.

To attach the cork pad, make sure the

camera platform is ﬁngerprint, oil and

smudge-free. Peel the backing o the

pad and press ﬁrmly into place, making

sure the pad’s slots and holes are

aligned with those on the platform.

MOUNTING THE CAMERA

Place your camera on the platform

and align your camera’s mounting

socket with the Speedy Bracket’s

camera mounting knob. Tighten the

knob until ﬁrmly connected.

MOUNTING THE FLASH

The Speedy Bracket is equipped with

an accessory-shoe mount which can

be used to mount your ﬂash unit or

TTL cord. To mount your ﬂash or

TTL cord, loosen the red knob on the

accessory-shoe, insert your ﬂash or

TTL cord’s hot-shoe foot, and tighten

the knob.

Tip: to mount the Nikon SC-28 or SC-29

o-camera shoe cords, remove the cold shoe mount

from the ﬂash arm and use the included mounting

screw to mount the cord to the bracket.

ADJUSTING

THE TENSION

The Speedy Bracket’s rotation tension

has been preset to accommodate

most cameras. However, the use of

heavier cameras may require

additional tightening. If necessary, use

a 3/8" socket wrench to adjust all four

lock nuts (1-4) in successive 1/8" turns

until the desired tension is achieved.

USING THE BRACKET FOR

HORIZONTAL SHOOTING

Grasp the grip on the Speedy Bracket

with your left hand, using your right

hand to rotate the camera clockwise

to the horizontal position.

Once in place, you can use your

camera’s own grip to compose and

shoot your photos.

USING THE BRACKET FOR

VERTICAL SHOOTING

Grasp the grip on the Speedy Bracket

with your left hand, using your right

hand to rotate the camera

counterclockwise to the vertical

position.

Once in place, you can use your

camera’s own grip to compose and

shoot your photos.

VELLO

A Gradus Group Brand

Produkt Specifikationer

Mærke:	Vello
Kategori:	Ikke kategoriseret
Model:	CB-200

Har du brug for hjælp?

Hvis du har brug for hjælp til Vello CB-200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vello Manualer

19 Juli 2025

24 Marts 2025

24 December 2024

11 December 2024

11 December 2024

Vello LENS-2020 Manual

11 December 2024

11 December 2024

11 December 2024

10 December 2024

12 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MY500XT Manual

1 August 2025

Navman FOCUS150 GPS Manual

1 August 2025

Scheppach TW1000 Manual

1 August 2025

Navman MiVue 750 WIFI Manual

1 August 2025

Navman MiVue Drive FHD Manual

1 August 2025

Midea MEC64 Manual

1 August 2025

Navman MY50T Manual

1 August 2025

Navman M100 Manual

1 August 2025

Navman MiVue 770 SAFETY Manual

1 August 2025

Navman MiVue 790 Manual

1 August 2025