Vello QuickDraw CB-100 Manual

Vello Ikke kategoriseret QuickDraw CB-100

Læs gratis den danske manual til Vello QuickDraw CB-100 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Vello QuickDraw CB-100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Camera Platform

Multiple Camera

Mounting Holes

1/4˝-20 Camera

Mounting Knob

Removable Accessory

Shoe Mount

Thank you for choosing the Vello QuickDraw

Bracket. The QuickDraw puts you in control of

your lighting whether you’re shooting

horizontally or vertically, and allows you to

switch between the two orientations with just a

quick ﬂip of the rotating arm.

Please follow the instructions below to get the

most out of your QuickDraw Bracket and to

prevent improper installation which may cause

damage to your equipment.

ROTATING FLASH BRACKET

QUICKDRAW

Replacement Foam Handle

(Cat. # CB-RF)

Rotating Flash Arm

Five-Year Limited Warranty

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for

a period of ﬁve (5) years from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s

responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that

fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be

determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of

equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance.

EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. This warranty provides you with speciﬁc legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and

return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s

own risk and expense.

For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

MOUNTING THE CAMERA

There are ﬁve mounting holes on the

bracket’s camera platform. Place your

camera on the platform and align your

camera’s mounting socket with the

mounting hole that best centers your

camera on the bracket. Attach the

camera to the QuickDraw bracket using

the 1/4˝-20 mounting knob. Tighten the

knob until ﬁrmly connected.

MOUNTING THE FLASH

The QuickDraw Bracket is equipped

with an accessory-shoe mount which can

be used to mount your ﬂash unit or TTL

cord. To mount your ﬂash, loosen the

red knob on the cold shoe, insert your

ﬂash, and tighten the knob. Unless you

are using a wireless ﬂash system, you will

need to connect your ﬂash to the

camera with the appropriate cord. You

may use cable ties or an optional cord

wrap to secure the cord alongside the

bracket.

To attach separate ﬂash heads such as

Norman or Lumedyne, or to use

o-camera shoe cords such as the Nikon

SC-28 or SC-29, remove the cold-shoe

mount from the ﬂash arm and use the

included mounting screw to mount the

ﬂash head to the bracket.

USING THE BRACKET FOR

HORIZONTAL SHOOTING

Position the ﬂash arm so that it is raised

directly above the top of the camera’s

body with the ﬂash mount centered

above the lens when the camera is held

horizontally.

USING THE BRACKET FOR

VERTICAL SHOOTING

Rotate the ﬂash arm 180° to center the

ﬂash above your lens when the camera is

held vertically.

GG3

Produkt Specifikationer

Mærke:	Vello
Kategori:	Ikke kategoriseret
Model:	QuickDraw CB-100

Har du brug for hjælp?

Hvis du har brug for hjælp til Vello QuickDraw CB-100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vello Manualer

24 Marts 2025

24 December 2024

11 December 2024

11 December 2024

Vello LENS-2020 Manual

11 December 2024

11 December 2024

11 December 2024

10 December 2024

12 Oktober 2024

12 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 300004 Manual

16 Juni 2025

Playtive IAN 321241 Manual

16 Juni 2025

Cleveland 24CEA10 Manual

16 Juni 2025

Hughes & Kettner Redbox Pro Manual

16 Juni 2025

Playtive IAN 279576 Manual

16 Juni 2025

Playtive IAN 321903 Manual

16 Juni 2025

Wahoo RPM Cadence Manual

16 Juni 2025

Playtive IAN 359564 Manual

16 Juni 2025

Playtive IAN 272426 Manual

16 Juni 2025

Playtive IAN 321236 Manual

16 Juni 2025