Vicoustic VicStudio Box Manual


Læs gratis den danske manual til Vicoustic VicStudio Box (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Vicoustic VicStudio Box, eller vil du spørge andre brugere om produktet?

Side 1/15
EN
VicStudio Box
Installation Manual
EN
MATERIAL NEEDED
Included
WaveWood Ultra Lite x8
Measuring TapeLevel
Flexi Glue Ultra x2
Not Included
Multifuser DC3 x2
caulking gun
Wall and ceilling surfaces should be examined prior to installation, ensuring they are clean, smooth, and dry. If you have
unpainted gypsum board surfaces, these should be primed with a drywall primer (or another material manufactured especially
for the purpose), to equalize the absorption between the gypsum board face paper, joint compound, and skin coating materials.
You should then apply the paint, and allow air circulation in order to dry the paint within the time frame specied by the paint
manufacturer. Please ensure the paint is dry before installing the acoustic panel. Make sure the room has all the necessary
conditions to receive the acoustic panels. After you apply the glue on the back of each acoustic panel, please ensure you hold
the acoustic panel against the wall the required time (mentioned above), and ensure it stays xed in place. This method is also
applicable to ceiling installations.
!To ensure that you maximise the strength of the glue, don’t make any adjustments
to the panel after bonding
50mm
Cut the tip of the glue nozzle according to the diagram.
Silicone Drop x4
VicFix Mini x4
Gauge x1


Produkt Specifikationer

Mærke: Vicoustic
Kategori: Ikke kategoriseret
Model: VicStudio Box

Har du brug for hjælp?

Hvis du har brug for hjælp til Vicoustic VicStudio Box stil et spørgsmål nedenfor, og andre brugere vil svare dig