1E
Minimum Cutout Opening Width 24-3/8" (619.13 mm)
Maximum Cutout Opening Width 24-11/16" (627.06 mm)
Minimum Cutout Opening Height 16
-
3/4" (425.5 mm)
Maximum Cutout Opening Height 17" (431.8 mm)
Maximum Height distance between holes 14-1/4" (361.825 mm)
Distance between centerline to holes
12-13/16" (324.65 mm)
Distance between holes 25-9/16" (649.3 mm)A
Distance between centerline to holes
14-5/16" (362.75 mm)
Distance between holes 28-9/16" (725.5 mm)B
15-13/32" (391.45 mm)
Ce nter Line
BUILT-IN TRIM KIT TEMPLAT E
FOR CUSTOM SERIES MICROWAVE OVEN 1. Align the mounting template center line with the center of the cutout
and the floor line with the floor of the cutout. Tape it into place.
2. For VMTK272, predrill 4 holes marked with a 1/16" drill bit.A
For VMTK302, predrill 4 holes marked with a 1/16" drill bit.B
3. Remove template from the cabinet.
TINSKB182MRR0
Floor Line of Cutout Opening
US E THI S SI DE OF TE MPLAT E FOR MODELS
VMT K272 and VMTK 302 ONLY .
1-5/32"
(29.6 mm)
IMPORTANT–Please Read and Follow!
• Theinstallershouldleavetheseinstructionswiththeconsumerwhoshouldretainforlocalinspector’suseandfor
futurereference.
or
Parts Included in VMTK kits
Front Frame
QTY 1
Back Frame
QTY 1
Front Frame Assembly QTY 1
Bottom Duct Assembly QTY 1
Screw A (1/2" length)
QTY 10 *
Screw B (1-3/4" length)
QTY 4
27" & 30"Surface Mount
Template 2-sided
or 36"Surface Mount
Template single-sided
QTY 1
Cushion QTY 3
Duct (A)-1 QTY 1 * QTY 1 *Duct (A)-3
Duct (B) QTY 1 *
*
Duct (C) QTY 1 *
Duct (A)-2 QTY 1 *
Screw C (3/4" length)
QTY 2
*VMTK277, VMTK307 and VMTK367 .ONLY
