Vogel's PPA 904 Manual

Vogel's Tilbehør til projektor PPA 904

Læs gratis den danske manual til Vogel's PPA 904 (2 sider) i kategorien Tilbehør til projektor. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Vogel's PPA 904, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CONTROL UNIT FOR COMMAND OR CENTRALIZATION MOTOR

Control unit for one electromechanical motor, centralizaon or integra-

on dry contact command.

The control unit imputs is: local impulsive command (open and close), ge-

neral impulsive command (open and close), general priority command

(open and close) dead man switch.

Prevalence of general command (dead man switch) on other controls.

CONNECTION LAYOUT TECHNCIAL FEATURES

Power supply: 230 Vac ± 10% / 50 Hz

Corr. max output: 5 A cos 1,4 / 2 A cos 0,4φ φ

Work Time: 120 seconds

Tens. output with: 230 Vac / 50 Hz

Dimensions without box: 46x46x37 mm

Terminal secon: ²2,5 mm

INPUTS AND OUTPUTS CONNECTION

1 = 230 Vac Neutral

2 = GND

3 = 230 Vac Phase

4 = COM x cont. neutral

5 = OPEN output

6 = COM x engines.

7 = CLOSE output.

8 9 - = COMMON commands.

10 = OPEN local command.

11 = CLOSE local command.

12 = OPEN general comm.

13 = CLOSE general comm.

14 = OPEN priority gen. comm.

15 = CLOSE priority gen. comm.

CONTROL UNIT CONNECTION

LOCAL COMMAND INPUT: allows the LOCAL com-

mand of the motor or system. The type of command

is IMPULSIVE and the contacts are voltage free. To -

stop the engine give an inverse command respect to

the one in progress (ex: if OPEN = CLOSE). Timed

command. Mulple buons can be connected in

parallel. Recommended cable for connecon: 3x0.25

mm or 3x0.22 mm.

GENERAL COMMAND INPUT: allows the GENERAL com-

mand of the engine or system. The type of command is

IMPULSIVE and the contacts are voltage free. To stop the -

engine give an inverse command respect to the one in

course (ex: if OPEN = CLOSE). Timed command. It’s possi-

ble to connect several buons in parallel with each other.

Cable recommended for connecon: 3x0.25 mm or

3x0.22 mm.

OUTPUT CONNECTION FOR COMMAND MANAGEMENT

OF OTHER UTILITIES TO CLEAN CONTACTS: useful for ma-

naging the control of other users or equipment. the control

contacts are voltage free. Connect the wire of the MUNICI--

PALITY to the terminal 4, the wire OPENS with the terminal

5 and the wire CLOSE with the terminal 7.

Recommended cable for the connecons: 3x0.25 mm /

3x0.22 mm

This product is an integral part of the automaon and must be disposed of together with it. As for the installaon operaons,

even at the end of the life of this product, dismantling operaons must be carried out by qualied personnel. This product

consists of various types of materials: some can be recycled, others must be disposed of. Inquire about the recycling or dispo-

sal systems required by the regulaons in force in your area, for this category of product.

WARNING! Some parts of the product may contain pollung or hazardous substances which, if disper-

sed in the environment, could cause harmful eects on the environment and human health. Local re-

gulaons may provide for heavy penales for the illegal disposal of this product.

As indicated by the symbol on the side, it is forbidden to throw this product in household waste. Then

perform the "separate collecon" for disposal, according to the methods established by the regula-

ons in force in your territory, or return the product to the seller when buying a new equivalent pro-

duct.

WASTE DISPOSAL

TECHNICAL DIRECTIVES

Sases all the technical regulaons applicable to the product Within the Scope of Council Direcves 79/23/EEC:

EN55014 1:2006+A1:2009+A2:2011 EMC—Electromagnec compability:Requirements for household appliances, -

electric tools and similar apparatus. Part 1 Emission

EN55014 2:1997+A1:2001+A2:2008 EMC—Electromagnec compability:Requirements for household appliances, -

electric tools and similar apparatus. Part 1 Immunity– Product family standard.

EN6100 3 2:2006+A2:2009 EN 61000 3 3:2008: EMC—Electromagnec compability: limits for harmonic current emis-- - - -

sions and Limitaons of voltage uctuaons and icker in low voltage equipment.-

EN60335 1:2012+A11:2014 EN 60335 2 103:2005+A1:2008: Safety of householf and similar electrical appliances– Safe-- - -

ty- Part 1: General Rules

Part 2 : Parcular requirements for drives for gates, doors, Windows Motorized, etc.

Direva 2014/30/EU

Direva 2014/35/EU

MOTOR OUTPUT CONNECTION: connect the cable OPEN

of to the motor the 5 , the clamp (motor wire brown)

cable clamp CLOSE to the 7 and (motor wire black) the

COMMON clamp motor cable to the 6 . (motor wire blue)

Motor wire yellow/green will not be connected.

Power charge allowed: MAX 500 W.

Cable the 0,75 mm.recommended for connecon: 3 x

Produkt Specifikationer

Mærke:	Vogel's
Kategori:	Tilbehør til projektor
Model:	PPA 904

Har du brug for hjælp?

Hvis du har brug for hjælp til Vogel's PPA 904 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tilbehør til projektor Vogel's Manualer

Vogel's PPL 2035 Manual

23 Juli 2025

Vogel's PPA 904 Manual

10 Januar 2025

Vogel's PPC 1075 Manual

9 November 2022

Tilbehør til projektor Manualer

Nyeste Tilbehør til projektor Manualer

Sony PK-F60LA1 Manual

8 September 2025

NewStar CL25-550BL1 Manual

6 September 2025

Sony VPLL-FM21 Manual

28 August 2025

Chief HB109B Manual

15 August 2025

XGIMI F063S Manual

7 August 2025

Reflecta 23153 Manual

6 August 2025

4 August 2025

4 August 2025

4 August 2025

4 August 2025