Vollrath 55459 Manual

Vollrath Skæremaskine 55459

Læs gratis den danske manual til Vollrath 55459 (12 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Vollrath 55459, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Operator’s Manual
Instacut™ 5.1 Slicer, Dicer, Wedger and Corer
©
2019 The Vollrath Company L.L.C. Part No. 351753-1 ml 1/30/19
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
• Inspect the equipment before each use to make sure it is clean.
• Inspect for broken, nicked or dull blades and if found, replace the
blade assembly.
• Verify the pusher block head assembly and blade pack are a matched
set and are properly aligned.
• Lubricate the guide rods as instructed, using a light coating of
mineral oil, Petrol-Gel, or other food grade lubricant. DO NOT USE
COOKING OIL AS IT WILL BECOME STICKY AND MAY
PERMANENTLY DAMAGE THE EQUIPMENT.
FUNCTION AND PURPOSE
The InstaCut™ 5.1 manual food processor is intended for slicing,
dicing, wedging and coring soft vegetables and fruits. It not intended to
cut hard root vegetables such as carrots and sweet potatoes.
WARNING
CAUTION
Item No. Description
55457 ¼" Dice
55458 " Dice³⁄₈
55459 " Dice½
55460 ¼" Slice
55461 " Slice³⁄₈
55462 " Slice½
55463 4 Section Wedge
55464 6 Section Wedge
55465 8 Section Wedge
55466 10 Section Wedge
55467 12 Section Wedge
55468 6 Section Core
55469 8 Section Core
2 Instacut
™
5.1 Slicer, Dicer, Wedger and Corer Operator’s Manual
FEATURES
BEFORE FIRST USE
Clean the equipment. See the Cleaning section of this manual.
OPERATION
Prepare the Food
Prepare the food to be processed. Maximum food size for:
• Slicing and dicing: 5" (12.7 cm) wide.
• Wedging and coring: 3 " (8.9 cm) in diameter.½
Prepare the Equipment
1. Verify the blade assembly and pusher block match. Each component
must be for the same size slice, dice, core or wedge.
2. Verify the equipment is clean and the blades are in good condition. If
blades are loose, broken or dull, replace the blade assembly.
3. Place the equipment on a clean, flat work surface.
4. Verify the bumpers are in place on the guide rods. DO NOT USE
EQUIPMENT IF BUMPERS ARE NOT IN PLACE.
NOTICE: Using this equipment without the bumpers in place may
damage the equipment.
5. Verify the blade assembly is properly installed in the base. The
thumb screw must be fully tightened and the blade assembly fully
tight against the side of the frame opposite the thumbsrew.
A Base Assembly
B Bumpers
C Guide Rods
D Thumbscrew
E T-Handle
F T-Handle Assembly. Consists of the pusher head, cleaning tool
and the pusher block.
G Cleaning Tool. (Dicer and slicer blade packs only)
H Pusher Block. Pushes the food product through the blade
assembly. Must match the slice, dice, core or wedge size of
blade assembly.
I Blade Assembly. Houses the blades, wedger or corer. Must
match the slice, dice, core or wedge size of the pusher head
block.
E
D
C
B
A
F
G
D
I
H
WARNING
Sharp Blade Hazard
Blades are sharp and can cause cuts. To avoid injury from
sharp blades, handle with caution.
Fully tight.
No space.
Thumbscrew

Produkt Specifikationer

Mærke: Vollrath
Kategori: Skæremaskine
Model: 55459

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath 55459 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skæremaskine Vollrath Manualer

Vollrath

Vollrath 55457 Manual

16 Juni 2025
Vollrath

Vollrath 15203 Manual

15 Juni 2025
Vollrath

Vollrath 55459 Manual

15 Juni 2025
Vollrath

Vollrath Cube King 1811 Manual

15 Juni 2025
Vollrath

Vollrath Cheese Blocker 1837 Manual

15 Juni 2025
Vollrath

Vollrath 47715 Manual

15 Juni 2025
Vollrath

Vollrath Cube King 1812 Manual

14 Juni 2025
Vollrath

Vollrath 401N Manual

14 Juni 2025
Vollrath

Vollrath 503N Manual

14 Juni 2025
Vollrath

Vollrath 55010 Manual

14 Juni 2025

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

RYOBI

RYOBI RHC4 Manual

31 Juli 2025
Guede

Guede GHF 800 Manual

30 Juli 2025
Sencor

Sencor SFS 1000WH Manual

26 Juli 2025
Royal Catering

Royal Catering RCGS-750 Manual

23 Juli 2025
Scheppach

Scheppach WTS2000 Manual

23 Juli 2025
Festool

Festool DSC-AG 125 FH-Plus Manual

19 Juli 2025
Hendi

Hendi 221297 Manual

19 Juli 2025
Severin

Severin AS 9578 Manual

11 Juli 2025
Team

Team AS 1000 Manual

9 Juli 2025
Graef

Graef STYLE S12002 Manual

8 Juli 2025