Vollrath CM2-12026 Manual

Vollrath Ikke kategoriseret CM2-12026

Læs gratis den danske manual til Vollrath CM2-12026 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vollrath CM2-12026, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Operator’s Manual

20 and 26 Inch Cheese Melters

Models JW1 and JW2

2017 The Vollrath Company L.L.C. Part No. 351018-1 en 12/8/17

Thank you for purchasing this Vollrath equipment. Before operating the

equipment, read and familiarize yourself with the following operating

and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE

REFERENCE. Save the original box and packaging. Use this packaging

to ship the equipment if repairs are needed.

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand

their meaning. This manual contains safety precautions which are

explained below. Please read carefully.

Warning is used to indicate the presence of a hazard that will or can

cause severe personal injury or death.

Caution is used to indicate the presence of a hazard that will or can

cause minor or major personal injury if the caution is ignored.

NOTICE: Notice is used to note information that is important but not

hazard-related.

To reduce risk of injury or damage to the equipment

• Plug only into grounded electrical outlets matching the voltage on

the rating plate.

• Use this equipment in a flat, level position.

• Unplug equipment and let it cool before cleaning or moving.

Equipment remains hot after it is turned off.

• Unplug when not in use.

• Keep equipment and power cord away from open flames, electric

burners or excessive heat.

• Do not operate unattended.

• Closely supervise equipment operating in public areas and/or

around children.

• Do not operate if equipment has been damaged or is malfunctioning.

FUNCTION AND PURPOSE

This equipment is intended to melt cheese or warm plates in medium

volume food service operations and restaurants. It is not intended to

bake food or cook raw food. It is intended for use in commercial

foodservice operations only. It is not intended for household, industrial

or laboratory use.

CLEARANCE AND ENVIRONMENT REQUIREMENTS

Do not place oven on surfaces or near walls, partitions or kitchen

furniture unless they are made of non-combustible material or clad with

non-combustible heat-insulating material. Ovens must not be used near

or below curtains and other combustible materials.

Do not place the oven adjacent to a heat producing appliance.

Allow a minimum of 8 inches (20.3 cm) of clearance on the left and

right sides of the oven.

WARNING

CAUTION

Item No. Model Description

CM2-12020

JW1

Cheese Melter, 20" wide, 120V

CM2-12026

JW2

Cheese Melter, 26" wide, 120V

CM2-12020

CM2-12026

2 20 and 26 Inch Cheese Melters Operator’s Manual – Models JW1, JW2

SET UP

Install the legs

NOTICE: Legs must be installed. Failure to install the legs will

restrict airflow and cause the oven to overheat.

Screw the legs onto the threaded nuts below the cheese melter.

Install the Shelf

Slide the shelf into the oven.

FEATURES

BEFORE FIRST USE

Clean the oven. See “Cleaning” on page 3.

OPERATION

Preheat

1. Plug the oven into a grounded electrical outlet that matches the

rating on the name plate found on the oven.

NOTICE: Using a voltage other than the nameplate rated voltage

will cause damage to the unit. Incorrect voltage,

modification to the power cord or electrical components

can damage unit and will void the warranty.

2. Adjust the shelf to the desired position.

3. Press the On/Off switch to the ON position. One heater element will

turn on and the oven will be in standby mode.

4. Set the timer for 10 minutes. The second element will turn on and

the oven will be full power.

Melt Cheese, Finish Cooked Food

1. Place the food on or in an oven-proof pan and place the pan on the

shelf.

2. Set the timer to the appropriate length of time to melt cheese, brown

or finish cooked food items.

3. When the time on the timer has expired, the oven will enter a

standby mode.

4. When finished using the oven, press the On/Off switch to the OFF

position.

A Fan

B Timer

C Adjustable Shelf

D On/Off Switch

E Reset Button

Front View

Back View

CAUTION

Burn Hazard

Do not touch the equipment while it is heating or operating.

Hot surfaces can burn skin.

Produkt Specifikationer

Mærke:	Vollrath
Kategori:	Ikke kategoriseret
Model:	CM2-12026

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath CM2-12026 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vollrath Manualer

Vollrath CM2-12026 Manual

15 Juni 2025

Vollrath CM2-12020 Manual

15 Juni 2025

Vollrath JW30PA Manual

15 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-20-B-PPV-A-KF Manual

17 Juni 2025

Festo DGST-25-80-E1A Manual

17 Juni 2025

OmniMount OBLED80FM Manual

17 Juni 2025

OmniMount FPK200FT Manual

17 Juni 2025

Festo ESNU-40-25-P-A Manual

17 Juni 2025

Festo DFM-25-125-B-PPV-A-GF Manual

17 Juni 2025

Playtive IAN 306800 Manual

17 Juni 2025

Playtive IAN 313534 Manual

17 Juni 2025

Microchip MPFS095TS Manual

17 Juni 2025

Festo DFM-40-50-B-PPV-A-GF Manual

17 Juni 2025