Voodoo Lab Pedal Power 3 Manual

Voodoo Lab Ikke kategoriseret Pedal Power 3

Læs gratis den danske manual til Voodoo Lab Pedal Power 3 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Voodoo Lab Pedal Power 3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PEDAL POWER 3®

Please register your Voodoo Lab product at voodoolab.com/register

If you have questions about this product, contact us at info@voodoolab.com

For the most up-to-date manual and information go to voodoolab.com/pedalpower_3

INTRODUCTION

Congratulations! You’ve purchased the finest fully isolated pedalboard power supply available. The

Voodoo Lab Pedal Power 3 is the culmination of years of research and experimentation. The result sets

new benchmarks in lowest noise, compact size, light weight, and total flexibility where every output

powers the most sensitive vintage analog stompboxes with zero noise and optimum tone, as well as

power hungry, high current digital effects.

A novel DC transformer design combines state-of-the-art organic polymer and ceramic filters with

traditional analog linear voltage regulation to achieve it’s industry leading zero noise performance.

Pedal Power 3 is the ultimate pedalboard power solution. It’s expandable up to 24 isolated outputs

with Voodoo Lab Pedal Power X4 and X8. Pedal Power 3 operates at all line voltages from 100-240VAC,

so you’re ready for international touring without step up/down transformers. You can even power 18V

and 24V pedals with optional voltage doubler cables.

Pedal Power 3 is made in the USA.

UNPACKING

Your Voodoo Lab Pedal Power 3 box contains the following:

Pedal Power 3 isolated DC power supply

AC line cord

DC power cables

CONNECTIONS

Important! DC power cables with a red or white plug end are reverse polarity. Almost all pedal effects

are standard polarity, using the wrong cable may damage them.

Pedal Power 3 is powered directly from 100-240VAC mains using the supplied region-specific AC line

cord. This is a standard computer-type IEC line cord, so it’s easy to obtain a replacement or different

length. For international touring simply use a plug adapter or the correct cable for that country.

Before connecting power to your pedals, verify that they require 9 or 12VDC and standard center

negative polarity. Then use any of the included cables with black plug ends. Otherwise, obtain the

correct cable and voltage adapter if necessary.

(1) X-LINK expansion ports. These power X-series expanders to add more isolated outputs.

(2) LED Status Indicator - Steady ON during normal operation.

(3) 9V/12V isolated DC outputs. Each output supplies up to 500mA @ 12V and 200mA @ 9V.

(4) 9V isolated DC outputs. Each output supplies up to 500mA.

(5) AC power input jack. Standard “IEC-type” connector accepts any mains voltage 100-240VAC.

AVAILABLE DC POWER CABLES AND ADAPTERS

Voodoo Lab can supply cables with different lengths, connectors or polarity. These and many more are

available at voodoolab.com or from your Voodoo Lab retailer.

Output Splitter: Allows two pedals to share a single isolated output. One side is ground lifted to

minimize interaction between the pedals (Part# PPAV)

Voltage Doubler Adapter: Combines voltages of two isolated outputs to power 18V and 24V

pedals (Part# PPAY). Also available as an all-in-one Voltage Doubler cable (Part# PPY)

Current Doubler Adapter: Combines current supply of two isolated outputs to power effects

requiring more than 500mA (Part# PPAP)

Line-6 HX Cable: Combines current of two isolated 9V outs to power Line 6 HX Effects and HX

Stomp (Part# PPHX)

Battery Snap Cable: Powers older vintage pedals without a DC power jack (Part# PPBAT or

PPBAT-R)

Pedal Power Replacement Cable Kit: Complete cable kit for Pedal Power 3 (Part# PPPK-3)

Produkt Specifikationer

Mærke:	Voodoo Lab
Kategori:	Ikke kategoriseret
Model:	Pedal Power 3

Har du brug for hjælp?

Hvis du har brug for hjælp til Voodoo Lab Pedal Power 3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Voodoo Lab Manualer

Voodoo Lab Pedal Power X8 Manual

24 August 2024

Voodoo Lab Pedal Power 2 PLUS Manual

24 August 2024

Voodoo Lab Pedal Power 3 Manual

24 August 2024

Voodoo Lab Pedal Power 3 Plus Manual

24 August 2024

Voodoo Lab Pedel Power ISO-5 Manual

24 August 2024

Voodoo Lab Pedal Power Mondo Manual

24 August 2024

Voodoo Lab Pedal Power 4x4 Manual

24 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite Protect It! TLP606 Manual

30 Juli 2025

AMX NMX-WP-N2510 Manual

30 Juli 2025

Yealink SIP-T23G Manual

30 Juli 2025

Rothenberger ROBEND 4000 Manual

30 Juli 2025

Tripp Lite SUPDMB710 Manual

30 Juli 2025

Tripp Lite IBAR6ULTRAUSBB Manual

30 Juli 2025

Advantech PCM-34R1TP Manual

30 Juli 2025

Tripp Lite SRIN4141410 Manual

30 Juli 2025

Tripp Lite TLM609GF Manual

30 Juli 2025

Tripp Lite Protect It! TLP368CUBEUAM Manual

30 Juli 2025