WAC Lighting H-LED820 Manual

WAC Lighting Ikke kategoriseret H-LED820

Læs gratis den danske manual til WAC Lighting H-LED820 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om WAC Lighting H-LED820, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014

INSTALLATION INSTRUCTION

Impulse 23W LEDme® Track Luminaires

H-LED820, L-LED820, J-LED820

CAUTION

• For Use with WAC “J”, “J2”,”L”, & ”H” track systems. Fixture may also be used on other manufacturers’ brands of track.

(Consult factory for compatibility)

• Read all instructions before installing.

Installation On Track:

Fixture Installation for J-LED820

1. Fixtures are designed for use on “J” series WAC Lighting track only. They may also be used on other manufacturers’ brands of

track. (Consult factory for compatibility)

Note: The track has a groove running its length to indicate polarity, and the locking tab has an arrow

indicating locking direction.

2. Insert adapter into track slot and rotate it 90°. The arrow should point to the grooved side of the tack.

3. Make sure the locking tab seats properly on the track slot.

4. Reverse procedure to remove. Track heads may be positioned anywhere along the track.

FIXTURE INSTALLATION FOR LLED820

1. Fixtures are designed for use on “L” series WAC Lighting track only. They may also be used on other manufacturers’ brands of

track. (Consult factory for compatibility)

Note: The track has a ridge running its length to indicate polarity, and the locking tab has a slant for easy installation.

2. Insert adapter into track slot and rotate it 90° so that the low side of the locking tab faces the ridged side of the track.

3. Make sure the locking tabs seat properly in the track slot.

4. Reverse procedure to remove. Track heads may be positioned anywhere along the track.

Produkt Specifikationer

Mærke:	WAC Lighting
Kategori:	Ikke kategoriseret
Model:	H-LED820

Har du brug for hjælp?

Hvis du har brug for hjælp til WAC Lighting H-LED820 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret WAC Lighting Manualer

WAC Lighting LT4 Manual

19 December 2025

WAC Lighting HTK-720 Manual

19 December 2025

WAC Lighting L-LED009 Manual

19 December 2025

WAC Lighting BA-AC24 Manual

19 December 2025

WAC Lighting L-1035 Manual

19 December 2025

WAC Lighting R4SCT-25EM Manual

19 December 2025

WAC Lighting LHT-808 Manual

19 December 2025

WAC Lighting H-2010 Manual

19 December 2025

WAC Lighting H-1035F Manual

19 December 2025

WAC Lighting H-LED820 Manual

19 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Akasa Newton A-NUC105-M1B Manual

19 December 2025

ProSelect PSTSN11AWH Manual

19 December 2025

Vaxcel T0079 Manual

19 December 2025

Foscam W5EP Manual

19 December 2025

Wine-Mate WM-4500SSVWC Manual

19 December 2025

Vaxcel T0351 Manual

19 December 2025

ProSelect PSTSP11AWH Manual

19 December 2025

Gamdias Aura GC1 Manual

19 December 2025

Silverstone SST-SX500-G Manual

19 December 2025

NightStick VIRIBUS XPR-5580R Manual

19 December 2025