WAC Lighting HR-836 Manual

WAC Lighting Ikke kategoriseret HR-836

Læs gratis den danske manual til WAC Lighting HR-836 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om WAC Lighting HR-836, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2014

INSTALLATION INSTRUCTION

2.5” Low Voltage - Metal Trim

HR-836

SAFETY INSTRUCTION

IMPORTANT: NEVER attempt any work without shutting o the electricity.

• Read all instructions before installing.

• This product must be installed in accordance with the applicable installation code by a person familiar with the construction

and operation of the product and the hazards involved.

• System is intended for installation in accordance with National Electric Code, and local regulations.

• Consult with local inspector to assure compliance.

• To reduce the risk of re, electrical shock and injuries to persons,turn o power at main switch before installing or modifying

the system.

• Warning: (Risk of re) do not install insulation within 3 inches of xture sides, or junction box, or in a manner to entrap heat.

• Retain instructions for future maintenance reference.

OVERVIEW

Trims t housings from the HR-800 series. Housing type and trim selection will determine maximum wattage;

consult catalog or spec sheet for compatibility

INSTALLING LAMP AND TRIM:

1. From the front of trim, insert the MR16 lamp followed by the clear glass lens, and secure with the lens retaining ring.

2. Push socket on to lamp pins.

3. Pressing the springs into the hole, until the trim ring is ush against the ceiling.

Produkt Specifikationer

Mærke:	WAC Lighting
Kategori:	Ikke kategoriseret
Model:	HR-836

Har du brug for hjælp?

Hvis du har brug for hjælp til WAC Lighting HR-836 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret WAC Lighting Manualer

WAC Lighting HR-LED272R Manual

8 Januar 2026

WAC Lighting HR-801 Manual

8 Januar 2026

WAC Lighting MT4LD211NE Manual

7 Januar 2026

WAC Lighting MT-4LD316N Manual

7 Januar 2026

WAC Lighting L-1052N Manual

7 Januar 2026

WAC Lighting MT4LD111NE Manual

7 Januar 2026

WAC Lighting MT-4LD116N Manual

7 Januar 2026

WAC Lighting JHT-007 Manual

7 Januar 2026

WAC Lighting HR-2LED-H13A Manual

7 Januar 2026

WAC Lighting J-LED009 Manual

7 Januar 2026

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Canarm PW-12 Manual

8 Januar 2026

ADDAC System ADDAC107 Manual

8 Januar 2026

Blaupunkt BP 7.3A Manual

8 Januar 2026

NUX Mighty 8 SE Manual

8 Januar 2026

Perrin & Rowe U.3520L Manual

8 Januar 2026

Ikea VOXNAN 703.285.89 Manual

8 Januar 2026

Vaxcel OW33583 Manual

8 Januar 2026

Vaxcel Mission T0444 Manual

8 Januar 2026

Vaxcel Yosemite OW33483 Manual

8 Januar 2026

Braeburn 109014 Manual

7 Januar 2026