WAC Lighting JTK-104 Manual

WAC Lighting Ikke kategoriseret JTK-104

Læs gratis den danske manual til WAC Lighting JTK-104 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om WAC Lighting JTK-104, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014
INSTALLATION INSTRUCTION
HT -104, LT -104, JT -104K K K (Available in LED)
CAUTION:
Read all instructions before installing.
Switch o power before installing or re-lamping.
Do not attempt to energize anything other than a track light xture.
All installation shall be in accordance with NEC and all local codes.
OVERVIEW:
Fixtures are designed for use on on WAC “L” , “H”, “J” series track.
They may also be used on other manufacturer’s brand of track
(consult factory for compatibility).
LAMPING:
1. Fixture is supplied with dimmable GU10 lamp. (LED Lamp included
when purchased as LED).
2. Insert lamp into the shade so the lamp pins protrude through the
back.
3. Place pins in the socket holes and twist 1/4” to the right.
The lamp should feel firmly seated.
4. Seat the lamp under the “V” spring of the gimbal ring.
FIXTURE INSTALLATION
1. Note the track has a groove running it’s length to indicate polarity.
2. Note the arrow on the locking tab.
3. Insert adapter into track slot and rotate it 90°. The arrow should
point to the grooved side of the track.
4. Make sure the locking tab seats in the track slot.
5. Removal is the reverse procedure. Track heads may be positioned
anywhere along the track length.
Push lamp into socket, then twist.
Seat lamp under the “V” spring

Produkt Specifikationer

Mærke: WAC Lighting
Kategori: Ikke kategoriseret
Model: JTK-104

Har du brug for hjælp?

Hvis du har brug for hjælp til WAC Lighting JTK-104 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret WAC Lighting Manualer

WAC Lighting

WAC Lighting HR-LED87 Manual

11 Januar 2026
WAC Lighting

WAC Lighting JTK-104 Manual

11 Januar 2026
WAC Lighting

WAC Lighting J-1023F Manual

11 Januar 2026
WAC Lighting

WAC Lighting MT4LD416NE Manual

11 Januar 2026
WAC Lighting

WAC Lighting HTK-725 Manual

11 Januar 2026
WAC Lighting

WAC Lighting JTK-703 Manual

10 Januar 2026
WAC Lighting

WAC Lighting JTK-765 Manual

10 Januar 2026
WAC Lighting

WAC Lighting J-1052 Manual

10 Januar 2026
WAC Lighting

WAC Lighting HR-AC73 Manual

10 Januar 2026
WAC Lighting

WAC Lighting HR-LED211 Manual

10 Januar 2026

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea

Ikea VOLLERSLEV 604.925.61 Manual

11 Januar 2026
Advantech

Advantech UTC-120H Manual

11 Januar 2026
Eliet

Eliet Turfaway 600 Manual

11 Januar 2026
Theben

Theben iONprime PB KNX Manual

11 Januar 2026
Ikea

Ikea BÅTSKÄR 806.232.50 Manual

11 Januar 2026
Taylor

Taylor 5334344 Manual

11 Januar 2026
Kensington

Kensington SD1610P Manual

11 Januar 2026
Schlage

Schlage L9456 Manual

11 Januar 2026
Bosch

Bosch ASX12VW30N Manual

11 Januar 2026
Panduit

Panduit CBX2IW-AY Manual

11 Januar 2026